20 Most Recent Moultrie MFH-DGS-100 Digital Camera - Page 3 Questions & Answers

www.moultriefeeders.com

www.Staples.com
www.shopping.com/Moultrie_MFH_DGS_100
Also try E-bay.

Hi,

 

I lost a user manual, then found these guys. They emailed it to me in about 2 hours and it only cost about £3, which i thought was very reasonable.

 

http://findmymanual.com/

 

Hope this helps.

Jane

Just go on to your camera settings and fix it from there if that does not work just go on to this link www.repaircentral.com.au get these people to repair it they might do it cheap:) goodluck and please rate this solution...

D cell

PUSH SWITCH ON SIDE OF SD CARD TOWARD THE CONTACTS ON CARD.

PLUG CAM TO PC ...TURN ON CAM found new hardward wiz comes up choose pick driver from list, choose generic on left/imaging device on right;find new drive under"my computer"double click folders and sub-folders until pics show up...enjoy
Ron L

it should have a switch to enter setup, and up/down buttons...you should be able to find a menu item that reads "delete all memory...no;toggle to yes and select...wait...done...go back to main setup screen...you've done it!
Ron.L

connect cam to pc;when wizard pops up,choose pick driver from list choose generic from left column/imaging device from right...go to my computer and double click on drive id'd for the camera;double click folders and sub-folders until pics come up...enjoy
Ron L.

never had much luck with 6v lantern bats...drain too fast.Moultrie estimates 20 day life...less if you're getting a lot of events...I recommend the "equivelent"..6v, 4AH or higher rating...
The SD card may be "locked". Check that small switch on side of card is pushed toward contact strips.
ron

without color correction software on your pc, you may get green tint from the flouresent flash, or use a "filter" over your lens.More expensive digital cams correct for this, back in the 35mm days, I had color correction filters I interchanged during shooting under other than daylight conditions,i.e., incadescent; flourescent;ect.

try moultrie...no guarantee, but they do sell replacement doors for some models;about$10 + shipping...might get lucky and get a replacemeny cover...don't call, email at moultriefeeders.com

..your not in "Interval Mode", are you?? IF your cam is set to start an "interval @ say 2400hrs( midnight) and to take pics every 1 min./5 min/;ect., IT WILL!
Make sure you're in "AUTO MODE"...It's easy to accidently hit the mode switch when moving the power switch from off to on..(I didn't find this out by reading a book...)

Run setup and make sure you don't have IR disabled/turned off.

check small switch on side of SD card; should be pushed toward contacts.Using the USB cable provided with cam, PC SHOULD RECOGNIZE DEVICE...might have to go thru windows explorer to find it, then use windows media player, or other, to open.
You are running 98 or later, right?

In the setup, it has a function to delay time between pics...1 min. works best for game trails; 5 min. for feeders, ect. However, these cams are sensitive; blades of grass; a bird flying by; the tree it's mounted to swaying; heavy rain...should I continue?

this is flash test fail....cover sensors when performing system ck.