20 Most Recent
- Page 7 Questions & Answers
It is telling you either the lamp is broken or the temp sensor or fuse has failed. You will need a new fuser unit. They have a 3 year warranty from the manufacturer. Your dealer can put in a claim if it is under 3 years and get a new unit at no charge. The only cost would be labor. This is for a c-3232 you didnt post what model this a common prob with this model so I posted it
on Jan 04, 2014
CALL SERVICE 7402
Error code 7402
Developing unit C noninstalling error
No density detection signal is output from toner sensor C in developing unit C.
Reinsert the connector. Also check for continuity within the connector cable. If none,
replace the cable.
Developing unit C and Drum relay PWB
Drum relay PWB (YC1) and engine PWB
Long story short, the printer MUST go in for a service as you will void ANY warranty if you try this yourself, it is an electronic failure.
on Jan 02, 2014
Sounds like You have it installed via network share so it's no in real term installed on your computer ,to delete it rift click in the printer icon and press delete
on Nov 12, 2013
Not finding what you are looking for?