20 Most Recent
Epson Stylus CX6000 All-In-One InkJet Printer - Page 3 Questions & Answers
My epson stylus cx6000 has stopped printing black.
Be sure you are using genuine epson ink. Epson printers are "smart" and will not allow generic ink to work properly. Even after you replace a generic with a genuine it may take several print outs and alignments to get it to print again.
I downloaded drivers for my Epson printer so thaat
If you can it will be ideal to have the printer crossed checked than to come to an early inference.
I would suspect that the drivers has some errors and so it has not meshed up. If so remove the printer connection from the PC and un-install the drivers.
Now reinstall the drivers and then connect the printer which will be detected and installed as a new hardware. if then the printer behaves the same manner, I would suggest that the printer be checked on another PC with the same drivers.
This will confirm if the OS has some errors with the downloaded printer drivers or that the drivers are faulty.
Also you can uninstall and remove the drivers and then download once again the drivers to make sure there were no errors.
Please check this out.
I was printing a paper
An e-90 error is a fatal error with the printer itself, the only solution is to contact Epson if the unit is still under warranty. Otherwise I understand the fix is more cosstly than the printer. The error seems to be reported most when a new black cart. is installed, you could try reseating the cart, powering down the unit for 15 min and then plugging back in and see if that will reset the printer. You can also try the SCC reset utility....http://www.ssclg.com/download/sscserve.exe
I installed a new black ink cartridge and went
Hi get the black cartridge and inspect if the is plastics tape on it. If there is remove it.
If already remove, remove the black cartridge and dip the print head with hot water or isopropyl alcohol. Then try to print again.
Maybe, this cartridge it faulty or long been stuck up and ink dries ups and need to soften
How can i reset this printer?
hold the power button for 15 sec. for a system reset. Try to remove each panel that opens and check for broken pieces of paper Recycle the system by reinstalling the software once again. If you getting error codes then follow this We need to clear out these error codes stored in your printer NVRAM or memory! Shut down the printer and pc associated with it. Remove data cable and reinstall the software for this printer, press and hold the power button on the printer for 15 seconds, then reconnect the printer after software installation is successful. This process will clear the error codes that you keep receiving.
How do i hook up my computer to my epson stylus
Please email me the version of operating system you are working on.
====
For Windows XP Profession / Home,Vista all versions,Win 7 and 32/64 bits Windows OS you can click
HERE to download the latest
Epson Stylus CX6000 All-In-One InkJet Printer driver.
===
To make the connection between computer and printer,you will need an USB A to B cable.
Please click on the link HERE to see the cable.
This cable can be as low as a $1 at Dollar Store and as high as $38+ for extra long length and gold plated version.
They will work the same.
I will settle for the $1 4 feet USB cable from the Dollar Store.
Please keep me up to date on all in one installation via email.
Getting error message E-01
An ink cartridge is expended or not installed correctly. See page 36 in the user manual to resolve, available here:
We were out of black ink so we changed the
You could find the root cause by performing different steps. One of the easiest methods is that you need to make sure that the plastic protective tape which is usually used on the new
black cartridge is off. Usually the user makes this mistake. This mistake might occurs due to absent-mindedness. The reason could also be some distractions which happen while loading the new black ink cartridge.
I cant find the scanner
It would help to know your Operating System. If you have windows XP, then click Start/Programs/Printers & Scanners. When your printers are opened up, you can right click the scanner icon and copy it or drag it to the desktop. If you don't have the scanner listed as an available device then you need to start the wizard to add it again. If you don't have Win XP then go to printers through control Panel and do the same once you get there.
Not finding what you are looking for?