Digital Lifestyle FA1B32Z 32 in. LCD Television - Page 5 - Answered Questions & Fixed issues
My 32
Ur tv the LCD inverter board it dead.Replaced this 2 LCD inverter boards,ur tv will get it backlight back to get a picture.Tries websites like Shopjimmy.com,Ebay.com to buy the 2 LCD inverter boards for the replacement.It a long boards in shape.
6/8/2010 3:41:14 AM •
Digital...
•
Answered
on Jun 08, 2010
•
689 views
I have a Digital Lifstyles 42
Hi,
If everything else works - there is sound and high voltage (static on the screen) - but there is no picture (including no on-screen menus), this limits the likely area of problems is the video output circuitry or CRT filament connections. Check to see if the CRT filaments are glowing. If they are not glowing, check for bad soldering on the CRT neck board and around the flyback transformer.
Where the picture is erratic - coming and going entirely or changing brightness suddenly, with power off, remove the picture tube socket (carefully!) and clean the pins with fine sandpaper and use contact cleaner on the socket. This source of bad connections can result in a variety of erratic symptoms. Check for bad solder connections on the CRT neck board.
GOOD LUCK....
5/21/2010 9:22:19 PM •
Digital...
•
Answered
on May 21, 2010
•
309 views
Lost the remote
best thing to do is buy a universal remote control.The codes and instructions are with it, but if you get in a problem come back to us and we will help.
5/17/2010 8:09:26 AM •
Digital...
•
Answered
on May 17, 2010
•
224 views
Prices...
around 650 retail
4/26/2010 4:53:53 AM •
Digital...
•
Answered
on Apr 26, 2010
•
79 views
No sound and no picture..any way to fix it?
Yes there is, but generally without an Oscilloscope, a Power Supply, a Multimeter, and a Signal Generator, and a Service Manual, & access to spare parts, then NO, not inn the home. These units are are extremely sophisticated devices these days. usually these faults are multi-headed insomuch as they often have a cause, and the damage done. and usually more than one "Section" is involved.It is my professional advise that you should find a reputable service center/man. Ask for a "Quote" before commencing with any work. This way you can then make an informed decision as to repair or replace.
3/22/2010 11:52:19 PM •
Digital...
•
Answered
on Mar 22, 2010
•
222 views
Sound when out on 36in Digital Lifestyle flat
Unplug,replug it an hour later,push menu button on the remote go to audio setting go down to reset push it to get back to factory setting,should get audio back after this.
3/17/2010 2:53:14 AM •
Digital...
•
Answered
on Mar 17, 2010
•
118 views
When i turn the t v on i get maybe one second of
Ur LCD inverter backlight board is dead.Replaced this LCD inverter backlight board.U will get picture back.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish LCD inverter backlight board for the replacement.It a long board in shape.
3/15/2010 11:50:33 PM •
Digital...
•
Answered
on Mar 15, 2010
•
175 views
Sometimes turns on but no picture
If you still have a waranty, you need a tech to go and replace the motherboard in this tv or burnt out lcd. If not, you may have to buy a new tv
3/5/2010 3:42:09 PM •
Digital...
•
Answered
on Mar 05, 2010
•
177 views
Digital Lifestyle FA2B42570, Remote MS119... where
Hello I have a Digital tv Lifestyles FA2B-42570 the section of the source(fountain) a few components were burned and there does not look the number of component or integrated circuit. If you can help your me or some person to look at this note covers very agradesido to saying the numbers to me on behalf of the integrated circuits. You agradesco in advance his(her,your) time and his(her,your) help with me.
The numbers in the board are: IC1, IC3, IC9, Q4 my email is
[email protected]
12/7/2009 8:36:31 PM •
Digital...
•
Answered
on Dec 07, 2009
•
1,077 views
I need a main power supply PCB for my WT323 LCD
There is no such manufacturer for that make. You must give all numbers off the board itself and hope its available. If not, it must be repaired to component level.
10/24/2012 1:17:47 AM •
Digital...
•
Answered
on Oct 24, 2012
•
388 views
My remote is broken for my digital lifestyles
I don not recommend getting a universal remote as they often cause more grief when it comes to finding a code that works. Contact the manufacturer or the closest authorised repair agent and they may be able to order a replacement original remote or a substitute. I hope this helps.
9/26/2010 1:57:05 AM •
Digital...
•
Answered
on Sep 26, 2010
•
537 views
We didnt have a surge protector on our tv we
Look at the power supply module, most of them will have a surge protection devices (called MOV, same as used in common surge power strip but cannot handle big surge that power strip can handle) installed to protect minor surge, it should blow the fuse. Once MOV blown, it will more likely stay short circuit, if you put the new fuse in it will blow the fuse right away. You need to see if the MOVs blew up any sign of blown up components.
11/1/2009 4:19:37 AM •
Digital...
•
Answered
on Nov 01, 2009
•
257 views
Not finding what you are looking for?