Pelican Products 9430 - Products 9430-B Remote Area Lighting System, Black - Answered Questions & Fixed issues


Contact LaCrosse direct. We are FIXYA dot com


Wireless Thermometer - La Crosse Technology

www.lacrossetechnology.com > media > catalog > product

PDF This Wireless Thermometer features: indoor/outdoor temperature with MIN/MAX readings in Fahrenheit or Celsius, outdoor temperature trend arrow, and manual ...

Measuring Tools... | Answered on May 07, 2020 | 39 views


First, insert the new batteries into the Temperature sensor. (see "Install and replace batteries in the Temperature sensor").
2.
Immediately after and within 30 seconds, insert the batteries into Weather station (see "Install
and replace batteries in the Weather station"). Once the batteries are in place, all segments of
the LCD will light up briefly. Following the time as 12:00 and the "Weather man" icon will be
displayed. If these are not displayed after 60 seconds, remove the batteries and wait for at least
10 seconds before reinserting them.
3.
After inserting the batteries, the Weather station will start receiving data from the sensor. The
outdoor temperature and the signal reception icon should then be displayed on the Weather
station. If this does not happen after 3 minutes, the batteries will need to be removed from both
units and reset from step 1.
4.
In order to ensure sufficient 915 MHz transmission however, this should under good conditions
be a distance no more than 100 meters between the final position of the Weather Station and the
sensor (see notes on "Mounting" and "915 MHz Reception").
Note:

If the signal reception is not successful on the first frequency (915MHz) for 45 seconds, the
frequency is changed to 920MHz and the learning is tried another 45 seconds. If still not....

and about the Sad Face

Comfortable:A happy face icon "(68°F to 78.6°F)and relative humidity reading between 45% and 65%.Uncomfortable:A sad face icon " " indicating any value outside the comfortable range

https://www.manualslib.com/manual/516303/La-Crosse-Technology-Ws-9630u-It-Ca.html?page=7#manual

Measuring Tools... | Answered on Apr 29, 2020 | 32 views


Reset display by pressing the RESET button, located on the back of the display unit inside the battery compartment. Date and time will need to be entered after a reset. Flashing of the outdoor temperature is generally an indication of wireless interference.
https://www.acurite.com/media/manuals/00754-instructions.pdf
Hard Reset:
  1. Bring both the sensor and display unit together and power down by removing at least one battery from each and/or removing the power cord.
  2. Make sure the A-B-C switch on both units matches. ...
  3. Reinstall the battery in the outdoor sensor.
  4. Reinstall batteries and/or power cord into the display unit
https://support.acurite.com/hc/en-us/articles/360013641694-3-in-1-Reset

Measuring Tools... | Answered on Apr 29, 2020 | 33 views


You may use following removals Tools
  • Moving Dollies
  • Pallet jacks
  • Hand Trucks
  • Hydraulic Tools
You may also get information about Removals Tools Here
Removal Companies Tools

Measuring Tools... | Answered on Apr 24, 2020 | 140 views


https://support.acurite.com/hc/en-us/articles/360007555574-Temperature-is-Flashing-Stuck-or-Showing-Dashes-on-a-Basic-Multi-Sensor-Display-

Measuring Tools... | Answered on Apr 22, 2020 | 105 views


Take it apart and get some isopropyl alcohol and a q-tip. check for corrosion around the terminals. If there is none, look for loose connections. If there is something loose, check if a bit of the board is loose. If a bit of the board is stuck to the terminals, give up on batteries.

Measuring Tools... | Answered on Apr 22, 2020 | 93 views


Your local Culligan dealer is the only place to get one. You need the retrofit kit to prevent the shaft of sealpack from bending.
RJ

Measuring Tools... | Answered on Mar 19, 2020 | 2,967 views


Change the batteries on both units. The home station often has a good display, but not enough power to communicate. I buy CR2032 in packs of 10!

Measuring Tools... | Answered on Mar 15, 2020 | 62 views


1
https://images.homedepot-static.com/catalog/pdfimages/c6/c6dfd8a3-256c-4785-a1b5-f845723b06e2.pdf

Measuring Tools... | Answered on Feb 28, 2020 | 74 views


probably needs new batteries ,

Measuring Tools... | Answered on Jan 08, 2020 | 73 views


Sometimes the weather brings us surprises. For example, it is sunny in the morning bet when you leave your office, it is snowing outside. So, it can spoil our evening. In such cases, snow day finder is necessary because it can warn you about future weather changes.

Measuring Tools... | Answered on Dec 21, 2019 | 2,156 views


if you changed batteries you need to put them close to each other to pair them. I have one I would know!!! also lithium batteries work best in the outdoor unit and last longer

Measuring Tools... | Answered on Nov 21, 2019 | 104 views


have you tried putting the two unit close to each other??

Measuring Tools... | Answered on Nov 21, 2019 | 131 views


FOR THEM BOTH TO SYNCH YOU HAVE TO PUT THEM TOGETHER FOR A WHILE. ALWAYS USE LITHIUM BATTERIES FOR THE OUTDOOR UNIT TOO

Measuring Tools... | Answered on Nov 02, 2019 | 151 views


try the makers website or google

Measuring Tools... | Answered on Oct 27, 2019 | 99 views

Not finding what you are looking for?
Pelican Products 9430 - Products 9430-B Remote Area Lighting System, Black Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Pelican Measuring Tools & Sensors Experts

Brad Brown

Level 3 Expert

18342 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Tom Chichester

Level 3 Expert

55379 Answers

Are you a Pelican Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...