20 Most Recent Akai LCT3201AD 32 in. LCD Television - Page 8 Questions & Answers

I just purchased this unit and briefly looked at removing the stand though I haven't taken it off yet. Anyways, I think you need to remove the black metal mounting frame from the TV before trying to unscrew the stand (4 screws) from the metal frame. After the frame is off the TV, I think you can then get at a couple of hidden screws to remove the stand from frame. I don't know if the frame goes back on the TV or not.

Akai LCT3201AD... | Answered on May 19, 2009

Go here: http://www.remotecodelist.com/remotes/ look it up by type of remote then to the device code...

Akai LCT3201AD... | Answered on May 18, 2009

Jebem li ga ne znam ni ja koje je:)

Akai LCT3201AD... | Answered on May 15, 2009

Although not a great solutin it does allow me to use my fairly new and expensive LCD TV. Heres what I do, UNPLUG THE TV FOR 20 -30 MINUTES, WHEN PLUGGED BACK IN YOU NEED TO VERY QUICKLY PUSH THE POWER BUTTON ON THE TV.
Let e know if this works fo you.

Akai LCT3201AD... | Answered on May 01, 2009

The MLT169A is a version number issued by MegaMeet in asia who built the supply. The correct part number for the SMPS for that unit is: E7802-005008 and unfortunately they are no longer available... However, there is some good news, those supplies can usually be rebuilt but you need to have the equipment, knowledge to make the repair...

Akai LCT3201AD... | Answered on Apr 16, 2009

Symptoms of a Defective or dying Power supplies on LCD TVs.
1. Light(s) on the front panel are behaving not normal example, blinking, amber color or not steady, fainting, etc.
2. TV not turning ON properly.
3. TV turns OFF by itself.
4. Needs to be unplug to many times to make it work.
5. Humming or high pitch noise heard through speakers or at the back of the TV.

I repair these power supplies. Write to [email protected] if you require further assistance

Akai LCT3201AD... | Answered on Apr 12, 2009

For a set this size, there should be at least 4 mounting holes for a wall bracket. Please note that wall mounting is an option so the holes may be covered by plastic caps to hide the holes. These holes should be in a box shape around 1 foot wide or so.


Akai LCT3201AD... | Answered on Apr 10, 2009

Go into your setup menu and turn off closed captioning. The black square is a box for the text.

Akai LCT3201AD... | Answered on Mar 31, 2009

Please send the model of your remote thank you.

Akai LCT3201AD... | Answered on Mar 11, 2009

Before you throw it out the window, let me know so I can be there to catch it. It sounds like you need to go thru the set up procedures again. Refer to the manual to do a setup.

Akai LCT3201AD... | Answered on Mar 06, 2009

Does it have a search mode process besides the code entry sequence?

Akai LCT3201AD... | Answered on Mar 04, 2009

You didn't say if it's new out of the box, anyway, check to see if any of the buttons feel abnormal when you press them, they should all feel by press identical. It's possible just a stuck button.
Let me know!

Akai LCT3201AD... | Answered on Mar 04, 2009

The problem is a failing power supply, there are several sources online that can rebuild your supply if you ship it to them hope this helps.

Akai LCT3201AD... | Answered on Feb 28, 2009

I had this same problem. I found a service tech in my area that knew the problem and the solution. Remove the back of the set and on the upper right side there is a black module with cooling fins on it. Amid the cooling fins there are 3 capacitors. They are black with a silver top, about 3/8" in diameter and 3/4" tall. The center of the top will be silver and will have two scored marks at right angles to each other. If the tops are swollen rather than flat they are bad and need to be replaced. Mine were rated at 16v 1000uF. He replaced them with 35v (maybe 36v I don't remember for sure) capacitors. They need to be unsoldered from the circuit board and new ones soldered in. Replace all 3. It only took him about 30 minutes to do and when if was fired up I found that not only was the problem solved but the picture and sound quality was greatly improved as well.

Akai LCT3201AD... | Answered on Feb 14, 2009

If the power supply is repaired, you can install it yourself and save a few $$$$ on the labor.
I repair these power supplies as well. If you need more info write to [email protected]

Akai LCT3201AD... | Answered on Feb 12, 2009

just replace the infrared diode of your remote control in you dont know how to do that..ask the tecnician to change in infrered diode in your remote control

Akai LCT3201AD... | Answered on Feb 06, 2009

Check the menu ,,it should have a option ,,called convergenge ,,that realigns the colors,, and some tvs have geomagnetic correction,, good luck

Akai LCT3201AD... | Answered on Feb 06, 2009

There should be screws for removal on the back. Commonly there should be 4 screws in the middle.

Akai LCT3201AD... | Answered on Jan 25, 2009

Not finding what you are looking for?
Akai LCT3201AD 32 in. LCD Television Logo

278 questions posted

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers


Level 3 Expert

85239 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Akai Televison & Video

  • Akai Televison & Video

Most Popular Question

scott tv lct37sha hdmi

  • Televison & Video