20 Most Recent Zebra Eltron P330i Card Printer Questions & Answers

Download the user manuals and guides from here: https://www.zebra.com/us/en/support-downloads/card/p330i.html#mainpartabscontainer_81ce=manuals

send !SA command from the driver to calibrate.

Have you cleaned the printhead yet? If it is easy to get to. Use some alcohol and cotton cloth. I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

http://www.zebra.com/id/zebra/na/en/index/drivers_downloads/firmware.html Try the above link to download the firmware. Gopakumar Gopalan Google

It could mean that the ribbon sensor on the printer is broken. Sounds like you need to send back to zebra for repair. This is free if printer is still under warranty. check out zebra's website for info on how to return printers for service.

lose the two screws from the front plate, put a card under the printhead, ajust the plate on tope of the card, tie the screws. send a command !SA from the driver, and print a test card (send IM command)

Install the driver again.
go to the driver and send the command "R"
and "!SA"
if not working, flash the firmware. (www.zebra.com) have to be the especific firmware
http://www.zebra.com/id/zebra/na/en/index/drivers_downloads/firmware/results.html?productType=6

please ajust the front plate (two screws) and run calibration (send from the driver, the command !SA)