20 Most Recent
Samsung CLP 300 Laser Printer - Page 3 Questions & Answers
When i connect my printer
There is a lot of problems that can cause the light to turn red, such as paper jam, low toner, full waste toner tank, etc. The only real way to know what the printer is detecting is to use the smartpanel utility program. It should be able to tell you what the printer fault.
Fix samsung clp300 printer
I played around with mine for a few weeks and could not find a simple fix. The printer was GREAT, until it wasn't. Repair cost was more than replacement, so it was time for a new printer. I sold my extra ink carts on CL. Sorry this isn't much help....
Where is the waste tank on a samsung CLP 300 laser printer?
Remove the waist toner bottle which is on the right of the drum as the cover is opened. Suggest emptying it inside a plastic bag to avoid breathing any of the toner dust. If you have time to make sure the container is dry inside, it may also be washed out with warm water and dried completely.
Service centres chennai,
Unfortunately unable to help on this occasion. I no longer have the samsung printer and did not experience the problem described.
Red lines on my prints
IF the space between lines is about 7.6 cm then the drum in the toner unit is deffictive
Samsung CLP-325w says its out of black toner but
I have the same problem. It says "End of life, replace with new black toner cartridge-K407 (CLT-K407S)" But I have just replaced the cartridge with a compatible cartridge few weeks ago and havent used it much so it should be almost full. And it was working after I replaced original cartridge with compatible one...Any help???
Not finding what you are looking for?