20 Most Recent
Audiovox FPE3206 32 in. LCD Television - Page 11 Questions & Answers
Analog or Digital Tuner in TV?
ATSC is the name given to the new digital signal. NTSC is the current analogue signal. This is the standard name given to the American system of broadcasting.
5/27/2009 11:07:26 PM •
Audiovox...
•
Answered
on May 27, 2009
Buzz sound
sounds like relay chater might be a bad capastor out of spec near the relay i dont have the spec on this tv but some sanyo tv had that kind of sound and it is a bad capastor like 470u at 25 volts in them. Look for a bulg on the top of caps around relay area. Board marking are like c 601 this is not the right number for your set just to let you know sort of what you are looking for the c standing for capastor. Be sure to unplug tv before youtake it apart there is high voltage in the set even after you unplug it.the cap shuld be black or blue with a silver flat top even if they look good still can be bad cant tell untell you test them on a machine.
3/4/2009 5:46:00 AM •
Audiovox...
•
Answered
on Mar 04, 2009
I have DVD player Audiovox
if you have the red and white audio jacks your stereo you should be able to connect from the dvd to your stereo and select the proper input on the stereo, that should put the sound through the car steakers.
good luck
2/1/2009 2:39:25 AM •
Audiovox...
•
Answered
on Feb 01, 2009
Where to buy p/n avd400ar
This remote is available from Audiovox. In the continental USA and Canada call 1 800 645-4994 to speak with a customer service representative.
11/26/2008 4:54:38 PM •
Audiovox...
•
Answered
on Nov 26, 2008
I have an AudioVox D1020
The PCB board for the CD controls has slid out of its bracket slightly into the pathway of the CD.
Open the DVD player, there are 3 screws on back corners and one on the bottom. Use a penny in the slots where the speakers go and gently separate the back from the front, but only very slightly. Be cautious now, because there are several wiring bundles between the front and the back. Reach into the gap, at the top where the CD control buttons are, find the PCB for the CD controls and gently push it back into place. Put the front and back together, power up and see if you've cleared the pathway.
9/22/2008 9:17:01 PM •
Audiovox...
•
Answered
on Sep 22, 2008
I have an Audiovox D1020
Did you play other DVD's on the same because it may happen somtimes that one particular player may not be able to play a dvd which is being played in other systems
9/19/2008 10:49:03 AM •
Audiovox...
•
Answered
on Sep 19, 2008
My picture is green. I
Hi,
let me know do you get green picture only with dvd player? and what input you use to hook up dvd player with tv?
Based on your reply, will be able to help you.
9/9/2008 7:15:54 PM •
Audiovox...
•
Answered
on Sep 09, 2008
We have an audiovox movies2go
This combo devices have two lenses, one to play CDs and one to play DVDs. It looks like the lens that plays DVDs is defective and will need to be replace.
Try using a lens cleaner. If the lens cleaner does not work, the lens is defective.
If your device is less then a year old, still under manufacturers warranty.
Let me know if you need further assistance.
9/1/2008 9:11:25 PM •
Audiovox...
•
Answered
on Sep 01, 2008
Unable to play Australian dvd.s
http://www.videohelp.com/dvdhacks
Search this site for your make and model to see if theres a region hack for your player. if theres not one there then there is not one available for your player at this moment. Regions change from country to country and go from 0-6. hope this helps
8/26/2008 10:32:54 AM •
Audiovox...
•
Answered
on Aug 26, 2008
I was in the states
There are 7 different regions 0 is region free and 1-6 are country codes. Your region 2 and america is region 1 so this is why the player isn't working with your discs. Usually you can hack/overide the region setting on some DVD players. Sometimes this can be done with the remote but sometimes the player has to be modded. This link will take you to a hack page for audiovox players. If theres a hack for your player then it'll be there.
http://www.videohelp.com/dvdhacks?dvdplayer=Audiovox&hits=50
8/18/2008 9:48:44 PM •
Audiovox...
•
Answered
on Aug 18, 2008
My flipdown DVD player in
it sounds like you reception is getting crossed on the video input.
or you video input cable has worked it's self loose not getting a good connection. i would check that to start out with.
8/14/2008 5:15:55 PM •
Audiovox...
•
Answered
on Aug 14, 2008
Not finding what you are looking for?