Akai LCT3285TA 32 in. LCD Television - Answered Questions & Fixed issues

If you wish to get some details; visit the site linked here. Pull up older posts. sounds like the main board fault. http://electronicshelponline.blogspot.com/

try to right click on the driver and search for Program Compatibility Troubleshooter or the properties where you can run the program in compatibility mode in other os version

Update the firmware. It is corrupted. Do a hard reset to this set, and then check. Sometimes it might help you. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

The TCON board or the LCD panel is Faulty. Can confirm by replacing the TCON board . If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Broken Screen on Plasma TV A broken TV screen can not be fixed. A replacement sceen can cost as much as a new tv since the new set prices keep falling. You can sell the unit for parts. (ebay?)

You can get a screen protector from;
http://www.tv-armor.com/

or fashion your own.

On the remote press the "exit" button. If that don't work try unplugging the TV then plug back on.

sir . i need akai ct2202 remote control model no. i lost my remote in transit and without it i'm not able to use the tv. my mail id : [email protected] pls help. thanks & regard's. V.SRIKUMAR

maybe your wire came lose in the back of your TV, look in back to see all connections.

Try the audio and video inputs on the set to see if have picture there with a DVD etcAlso possible if using a box or receiver in line they can cause this==I ask as I do not know what you have hooked up.If a box is used and rear inputs are ok unplug set and box for several minutes and plug back to see if a reboot helps.

Hi, Ok, great.Look at the back panel and you can see four holes spaced 4" between the top and bottom, and 16" from side to side. these are for universal mount. http://www.bestbuyplasma.com/Plasma/tvmounts_land.asp I think this clears your problem regards sreejith "Please use caution if wall mounting this product. Follow all directions from the manufacturer of the wall mount and be sure to securely fasten the product to the mount. While the TV can be wall mounted, improper wall installation may void the warranty."

Hello,The most common cause of this type of power issue is a failure of the filter capacitors on the power supply board. Below is a picture of the board with the faulty capacitors circled, there are 2 more under one of the big black heat sinks. The board can be repaired by replacing the bad capacitors. Below the picture is a link to a kit of the correct parts for the board repair if you want to do the job yourself.http://www.ccl-la.com/catalog/product_info.php?products_id=240I hope this helps you out.

If it goes on for a very short time (a secong or so) it could be the power suply unit.

The set will need to be serviced, it has a internal problem !

I would try unplugging everything, then plug back in. Try new batteries in remote if there is one. This sounds like TV is not getting signal to turn on, so I would look carefully at remote power and 'eye' and power button connections. Good luck!

ck manual may be on stad by

If it has a format feature it will usually only be on the original remote--if using a box of some type look for the feature to also be there.

Target sells a GE Universal Remote Control, 5 Device with learning feature. I can't say if it works with your Verizon DVR, but its code for the Akai LCT3285TA is 1139. If you have the Verizon's remote, you should be able to use the learning function to make the GE control it - that's if the GE doesn't have a built in code that will work for this DVR.

Hi my name is Mike Houston of DISH Network and I see youwant to program you're Akai TV to our DISH Network remote. There are some easysteps to allow setup to your TV and I will send the link, http://www.dishnetwork.com/SupportSection/remote-setup.Please select the receiver you have and it will take you to a help page. I willsend a link for a Power Scan and the power scan will find the remote code foryou; http://www.dishnetwork.com/SupportSection/power-scan-instructions.If you have any questions or concerns please e-mail me at [email protected].

Hello,

Power supply board just die.It can be dead at anytimes.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
Good luck in solving the problem...

Metric M5 or M6, you can get them from ACE hardware, HD, or Lowe's for about 20 cents each, the length will depend on the thickness of the mounting plate, by the way, when you buy the wall mounting kit, it will come with a bag of screws for mounting the TV to the bracket.

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you. Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.