Top 20
Spectroniq Protron PLTV-32 32 in. Plasma Television Questions & Answers
Spectroniq DTV menu will not appear
When I encounter people trying to solve HDMI-related problem, I invariably, immediately recommend switching over to component cabling. The picture is better, and there are far less issues with both HDCP and resolution switching issues.
That said, on to the problem you requested help about:
First I recommend you unplug all signal and power cables to your set and walk away for a good ten minutes. This ought to reset the brain inside your TV into thinking it is being setup for the first time. Reconnect the antenna, power and signal cabling, turn your set on, and run through the Auto Search function of your TV's on screen display setup menus, taking care that 'AIR' is selected as your TV's Tuner Mode (it will have most likely reverted back to 'CABLE'). This ought to help it find your antenna's DTV channels.
I hope that helps.
________________________________________
Protron PLTV-32 Manual
DownloadProtron PLTV-32 Service
Manual Download
7/5/2010 1:56:03 AM •
Spectroniq...
•
191 views • 0 helpful votes
I turned on my spectroniq/protron
Sounds power supply board is bad and requires replacement in TV.
Available in
Shop Jimmy and ask local TV tech for replacement if you are not comfortable with replacing power board in TV.
Thanks.
8/18/2009 8:43:59 PM •
Spectroniq...
•
83 views • 1 helpful votes
My lcd tv has no sound or picture it has a grey screen
You should try to use the Component cables. The red/green/blue cables as this will give you a better picture. Make sure your DVD player and TV will support those cable. However, the cable your using now will work. Your TV might be on the wrong input. Look for a button on the TV that says INPUT or SOURCE to change the input. It might be only on the remote control and not on the TV itself.
5/2/2009 12:16:47 AM •
Spectroniq...
•
405 views • 1 helpful votes
I have a 32 inch spectroniq plasma tv and my
Sometimes a universal remote wont work with a particular brand. I know the same problem exists for Emerson and Syvania tv's and many other 2nd tier brands as well. Try seeing if you can find the customer support number for your tv. Maybe you can then get the parts department in ordering an exact replacement for your set. If you cannot do so, try 1-800 remotes or their website. They will ask for your model number. Let me know if that helps.
3/15/2009 5:58:39 PM •
Spectroniq...
•
526 views • 0 helpful votes
1080i
According to specs, the PLTV-32 supports up to 720p.
That's essentially the same as 1080i, and should work with a 1080i signal.
3/19/2009 7:10:45 PM •
Spectroniq...
•
176 views • 0 helpful votes
Crack lcd screen
A replacement screen will cost as much as a new TV, plus they aren't as easy to replace as the ond CRT's.
1/26/2009 4:46:07 AM •
Spectroniq...
•
101 views • 0 helpful votes
How to program remote control pltv3250 to spectroniq tv pltv4250 lcd 42
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "
brand name" to your device; in the "
Search box at the top right of the display window" to get gathered related posts.
11/23/2016 10:59:10 PM •
Spectroniq...
•
175 views • 0 helpful votes
I DONT HAVE THE REMOTE FOR THIS TV SO IM TRYING TO PROGRAM THE REMOTE
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://electro-medical.blogspot.com/
4/15/2016 2:55:17 PM •
Spectroniq...
•
83 views • 0 helpful votes
Not finding what you are looking for?