20 Most Recent Canon imageCLASS MF4150 All-In-One Laser Printer Questions & Answers

Hello and welcome to FixYa!
The manual reset Method for
Canon image CLASS MF4150 All-In-One Laser Printer is given below, Follow every step carefully:

  • Press and hold STOP/RESET button.
  • Press and hold POWER button.
  • Release STOP/RESET button without releasing power button.
  • Click STOP/RESET two times and then release power button.

Now your printer enter into service mode. Now

  1. Prepare paper on the paper tray
  2. Press Stop/reset button for 1 times and then press power button, await till printer finished print.
  3. Press Stop/reset button for 2 times and then press power button, await till printer finished print again.
  4. Press Stop/reset button for 3 times then press power button to reset EEPROM.
  5. Press Stop/reset button for 4 times then press power button to reset Waste Ink Counter.
  6. Switch off the printer. if printer doesn't turn off, press button power until printer off.
You have done it
If any Further assistance required, I am here to help
I hope this solution helps you.

Your token of appreciation in the form of Rating as FOUR THUMBS (given below to this solution) and testimonial will be esteemed.
Thank you for Using FixYa

Canon imageCLASS... • Answered on May 09, 2020

This problem bugged me for months! Selecting CONT. PRINTING as indicated by Small6363 allowed to print with the warning light on but did not solve the warning light problem. I eventually found a way to bypass the flashing light and warning message.

Underneath the cartridge, on the cylindrical portion, in the middle there is a small flat rectangle. This is the ink level detection spot. Cut a piece of aluminum foil of the same size and place it with a piece of scotch tape overt that flat rectangle. Voilà! No more flashing red light and no more out of toner message! Of course you have to monitor your level visually and change the cartridge when printing starts to fade.

Hope this helps!


Canon imageCLASS... • Answered on Apr 20, 2020

My IT guru at the place I work found an AMAZINGLY SIMPLE SOLUTION. Remove the paper, then remove and replace the toner cartridge. Now put the paper back in, and you are ready to go. Our IT man rocks!

Canon imageCLASS... • Answered on Apr 06, 2020

it is indicated as a service man error code in the form of "SYSTEM ERROR E+number." E225 CIS (Contact Image Sensor) lamp has a fault. - Turn the power OFF and then back ON.. - Replace the CIS unit.

Canon imageCLASS... • Answered on Jan 13, 2020

You can gave it a go.

ERROR E225 Canon imageCLASS MF4150 And maybe others

Canon imageCLASS MF4150 Firmware Update V062 Windows 2000/XP/Vista/Windows 7(all x32/x64) from Canon Multifunction .

Hi there
This is because you need to update your Firmware,
So what I have don for you I have found the Update you need and I have put it on my website for you to download, this is a update for Vista / Win 7 / All 32Bit and 64 Bit.

Click Link = http://www.4all2sell.com/driver/Canon-MF4150_FirmwareUpdateTool_V062.exe

All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

All files on my website is only there foe a limited time.

Canon imageCLASS... • Answered on Feb 11, 2019

system error e225 on canon mf4010

Canon imageCLASS... • Answered on Jan 06, 2019

it seen likes a firmware fault, disconnect from ac source a few minutes, if problem persist search for technical support

Canon imageCLASS... • Answered on May 07, 2018

According canon support in this article: https://support.usa.canon.com/kb/index?page=content&id=ART105046, You will need to download the updated mf4150 firmware to prevent the occurrence of the E225 error Code. Solution: (1) Turn the power off, (2) Replace the CIS Unit Here you will find the direct link to download: http://www.canondriversoft.com/mf4150 Greetings and I hope to solve your problem how to solve e225 error code-i5pszadi14d4a4tlx0e1accj-5-0.jpg

Canon imageCLASS... • Answered on Apr 27, 2018

Vista is not supported. Drivers for Win 8 to Win 10 are available and work 100% Get Windows 10 and be happy again.

Canon imageCLASS... • Answered on Feb 15, 2018

hi martha i think you need to contact a technician to reconnect the arm

Canon imageCLASS... • Answered on Aug 26, 2016

Not finding what you are looking for?
Canon imageCLASS  MF4150 All-In-One Laser Printer Logo

507 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2345 Answers

Cindy Wells

Level 3 Expert

6259 Answers


Level 3 Expert

1997 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

imageCLASS Canon

  • imageCLASS Canon

Most Popular Question

error e225

  • Office Equipment & Supplies