JVC GR-D33 MiniDV Digital Camcorder - Answered Questions & Fixed issues

Get it downloaded here : www.givemefile.net > ... > Camera & Foto > Digital camera
www.jvc.com/
www.helpdrivers.com/cameras/JVC/

Regards, Jay

This is usually caused by a defective CCD image sensor and can be repaired fairly inexpensively. However, it’s not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I’m a professional repair technician with over 20 years in the business and have repaired many of these. I’m semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .
.

• How to fix lens cap problem with my JVC GR-D33 video camera?

use the google for this

Please locate RESET push button in camera (its tinny button pushed by ballpen) and perform reset.
2nd possibility is broken ribbon wire connecting lcd and main board of camera. in this case you need qualified technician or JVC service center.

Its problem of bad CCD Imager, Please click JVC Customer Notification page for details. JVC might have plan to repair it free of cost. Hope this info will help you to solve the problem.

CCD Program for This Model - GR-D33US JVC has received reports that in certain circumstances, this model may, while in the camera mode, show no picture, a distorted picture and/or display “LENS CAP” even though the lens cap is removed. We have identified the probable cause as a failure of the CCD image sensor. Repairs of units exhibiting these problems as a result of a defect in the CCD image sensor will be made free of charge at JVC Factory Service Centers. Click this Repair Request link to download a Repair Request Form and find your nearest location.
Please call our Customer Care Center at (800) 858-6442 if you encounter any problems in obtaining a free repair. We apologize for any inconvenience and are appreciative of your understanding and support.

i ma sure wht u talking about !!

Have you looked in the manual ?

Take camera and its battery to a camera outlet, ask them to check the built-in rechargeable battery. Most outlets will help you with this, as its likely that if the battery has failed, you'll buy a replacement from the same dealer.

not sure on this one but it might be the heads in your vid cam may need cleaning. or the tapes are not running straight on the heads or the rollers in side. if the vid cam has been in a cold place it can cause this fault as the heads may have a bit of damp. try putting a tape in and run it fast forword in play mode and see if starts to clear the playhead.if it does keep doing it until you see a clear picture. this could also be a head misalignment fault if it is you will have to take it to some one to have a look at. if any of the above does not work then you will have to take to some one to look at it. .

Sounds as if the battery needs replacing - have you tried with a spare battery ?

The heads need cleaning. DO NOT USE A HEAD CLEANING TAPE. Thats like holding sand paper to the drum. Use alcohol and a swab.

Do you have the sd card that holds the pictures? Put in computer. Computer will give you option how to open and save photos. You do not have to use makers software disc, any photo reader can store your pictures on computer.

How much would one be worth today

Not sure , do you mean safe mode ?

hi, here you have it... http://limedriver.com/driver_info/jvc_gr_d366ek_camcorder Drivers for JVC GR D366EK Camcorder cheers, mich

Your PC must have a IEEE1394 port (FIREWIRE PORT). If you do not have, you can try PINNACLE DAZZLE to video capture.

iPhone can not play AVCHD format directly. You may need to convert it first. Transfer videos from your digital camera to your computer, then convert AVCHD to mp4 or mov format. Last but not least, transfer videos to your iPhone via iTunes. How to Convert AVCHD to MP4 for Free

that means the head is sticky or the takeup rollers are icky take it apart . clean all the parts the tape touches with something thats strong but little water . as for the head very carefull clean it when you get to the actual holes where heads are only use a proper qtip wetted . look it up or youll break them. on the rubber rollers scrub them . then load the tape an watch it run. its easy to fix this but you need a nice clean place an some small phillips , take pics of parts/screws if needed