Top 20 Brother DCP 130C All-In-One InkJet Printer Questions & Answers

Very likely it will not without installing a new driver if Brother has made one available yet.

1-877-BROTHER (877-276-8437) M-F, 9:00am to 9:00pm Eastern Time

Pull out the paper tray. Lift the cover of the tray. Slide paper into the tray. Close the cover of the tray. Push the tray back into the machine till it clicks into place.

Don't know what Clive is talking about. That will not cure a 4F. Cene765 is bang on. Also his comment to buy a new printer is also spot on . the cost of repair far outweighs the value of the printer.

Im afraid I can't help

Go To Below official Brother Printer Page For Your problem, How do clear paper jams Brother Hope It's resolve all Your Printer Problem, Or Still having Problem Then follow Us For Brother Printer Support

looks like something is blocking paper feeder, roller or the caret. check for some unwanted parts of paper or paper clips.

The flat cable of the scanner wasn't connected properly. Try to straighten the end using your finger nails , then slot in the connector. Try again. Good luck

if you want to damage your device you can use tin instead of gold.

Print head or PH PCB faulty

how to clean machine error 50

This is the problem with purging unit or head... better contact brother care...

Around US100 not inclusive of freight

how to clean machine error 50 thank you

You will need a USB Cord and Printer Driver (depends on your Operating System).

You can download the Brother printer drivers from their support WEB site. Please click on this link and select your model printer to download : - http://www.brother.com.au/ProductsSolutions.aspx

printer heads need to be reajusted