20 Most Recent
Brother DCP 130C All-In-One InkJet Printer - Page 3 Questions & Answers
DCP-130C Clean Unable
- pull out the AC plug - put back the AC plug while holding down the "menu" button and keep holding it (15 sec)- now you are entering the MAINTENANCE mode and "error 46" pops up in the display- select 8 by using the arrow buttons ,push OK and select 0 and push OK- 00:00 00:01 OK (the display is showing this message)- now push the MONO button 25 times until you see PURGE: xxxxx- Select 2, push ok, select 7,push ok,select 8,push ok, select 3,push ok- the purge counter indicates now: purge: 00000- switch off the printer ,switch it on- ready to print
Clean unable 51 it says check trouble shooting and routine mainta
Hi there
Solution:
· Machine off
· Switch on the machine while holding down the “menu”button until all the leds are flashing on/off. Now you are in “maintenance” mode.
· Press 80
· Press the “mono start” button several times until you see “purge: xxxx”
· Press “2783” in order to reset the purge counter. You will see: “purge:0000”
· Press the "stop" button.
· Press “99” to exit the maintenance mode.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Connect
You will need a USB Cord and Printer Driver (depends on your Operating System).
Its says. see trouble shouting and routine
Hi there. . . okay . . . Follow this step 1.) Unplug your printer. 2.) Plug your printer again while holding the menu button 15 sec. 3.) select 8 by using the arrow buttons ,push OK and select 0 and push OK 4.) then numbers appear looks like this ###:### ###:###. 5.) now push the MONO button until the purge:#### appears on the LCD 6.) Select 2, push ok, select 7,push ok,select 8,push ok, select 3,push ok 7.) - switch off the printer ,switch it on - ready to print - CHEERS! email me if I helped you. .
[email protected]
Brother MFC-620 CN message 'Unable
This error is related to several issues, but mostly it's an issue with the Purge Counter, means it's full. Follow the steps to reset the purge counter.
- Turn Off the Machine
- Switch On the machine while holding down the "menu"button until all the leds are flashing on/off. Now you are in "maintenance" mode.
- Press 8 0
- Press the "mono start" button several times until you see "purge: xxxx" (xxxx are digits)
- Press "2 7 8 3" in order to reset the purge counter. You will see: "purge:0000"
- Press the "stop" button.
- Press "9 9" to exit the maintenance mode.
If the above method doesn't help, there must be actual paper jam or something obstruction the movement of the printer. You can try with this steps recommended by Brother
(Click Here).
If the problem persists, let me know.
Good luck.
Thanks for using
FixYa.
Not printing glossy A4 paper / paper jam / no paper feed
dont use thick photo paper like 230 gsm up, instead use 180 gsm papers. but if you dont want to waste the purchased thick photo papers, you can open the back and manually insert the paper once the printing process started. i tried this as a trial & error basis until i had perfected it.... hope it works with yours.
Not finding what you are looking for?