Panasonic NV-GS27 Mini DV Digital Camcorder - Answered Questions & Fixed issues

Use the blunt end of a cocktail stick.

Hi i have panasonic NV-GS27 Mini DV Digital Camcoder but have lost the installation CD!! Please tell how can i download the software. pls let me know the site.. ammu

You may download a copy of the manual from here.

Welcome to FixYa.

You can order it online from AMAZON. Go here >> http://astore.amazon.com/securetransaction-20/detail/B000TM8V32

Thank you for using FixYa.
Jas

Welcome to FixYa.

You can order it online from AMAZON. Go here >> http://astore.amazon.com/securetransaction-20/detail/B000TM8V32

Thank you for using FixYa.
Jas

need new manual because my other fell into the river

Where can I download the software (Sweetmovielife) for Panasonic NV GS27

Connect with a firewire cable and open Windows Movie Maker, it should work.

Hi, did you get the issue resolved? i have te same problem an it is becoming a nignmare!

You can add a video light to the camera.
Don't worry if there is no SHOE attachment as you can buy a accessory adaptor that will give you a mount point. These screw into the tripod hole.
Low or no light will cause any camera to play havoc with focus.

This is usually caused by an oxidized or defective Audio/Video drum. You can try running a cleaning tape through the camera. If this does not solve the problem the camera will need to be serviced by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

This is the Panasonic site for your driver and any support for you camcorder http://www.panasonic.com.au/

Hi, please get it here : www.userdrivers.com > Camcorder
www.nodevice.com/driver/company/Panasonic/page10.html

Regards

check the battery maybe it's already dead, buy similar battery recommend by panasonic. install it if problem still there the power supply circuits is the culrpits

This can be caused by several problems including a defective eject switch in the cameras internal circuitry or a bad motor and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Download your driver here : www.filebuzz.com/.../Panasonic_Nv_Gs27...Drivers/1.html

Tape mechanism problems can be quite complicated but they can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be diagnosed by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

You might be connecting the Camcorder using USB interface. The drivers for USB streaming is not available for Vista and Windows 7..
Operating System also matters..
If you're using XP OS, you can install the driver from supplied CD and use Windows Movie Maker to transfer the recordings using USB interface.
Vista, Windows 7 - You need to use i.LINK or A/V interface to transfer the recording. When using i.LINK with Vista, you can use the Picture Motion Browser software.
I think this will definitely help you to connect the Camcorder..

I right clicked on the CD in windows explorer and hit "open". I then ran each of the setup files individually after right clicking and hitting "run as admin". this seems to have worked.

take battery out, connect mains power and connect camera to pc via dv cable