20 Most Recent
Brother Multi-Function Center MFC-3360c All-In-One InkJet Printer - Page 2 Questions & Answers
Fax will not print: I
Does the machine print anything? such as a directory or print when making a copy? I rather suspect it does not. When an incoming fax is recvd does the paper get pulled in and come out blank? If so your problem is with printing (or lack of it). Perform head cleaning. Also make sure the black cartridge still does not have its deal stuck on it. Post again if you still have problem.
5/5/2011 9:35:16 PM •
Brother...
•
Answered
on May 05, 2011
How do i email a
Make sure you know where the scanned document was saved to on your computer. Normally by default it is in My Documents -> My Pictures -> My scans. Then open your e-mail account, choose a new message and click on Attach. From there it'll prompt you to "browse" to the location of the document, once you point it in the right place, you basically hit OK and it'll upload it to the e-mail as an attachment. From there you can write your message and send it off.
3/3/2011 5:36:23 PM •
Brother...
•
Answered
on Mar 03, 2011
We can not get machine
I f you believe you have connected the telephone lines correctly go to start ,all programs,then brother then installation diagnostics this should tell you what is wrong and help you further resolve the problem
2/28/2011 8:52:19 PM •
Brother...
•
Answered
on Feb 28, 2011
New black ink cartridge wont
It seems simple enough, but this is one of the most effective ways of fixing printer cartridge error. Mostly, printer cartridge error occurs when the printer head is unable to identify the cartridge properly. And the basic reason behind this is that the cartridge is improperly attached.
To reattach the cartridge check the following steps :
turn on the lid of the printer and then remove the cartridge from the printer head.
Check the cartridge to make sure that there are no scratches or other damaged parts that can contribute to a printer cartridge error report.
Take note that the cartridge should not be left open for more than 30 minutes; otherwise the ink will start to dry up and the cartridge will get clogged.
http://en.kioskea.net/forum/affich-40171-printer-not-printing-black
11/10/2010 5:21:44 AM •
Brother...
•
Answered
on Nov 10, 2010
Have replaced old black ink caartridge plus the
Probably the printhead of black cartridge side in the printer is damaged in the worst scenario.Else,just clean the contacts where the black cartridge connects after snapping into the printer,with some cleaning liquid (Nephtha,CCL4)etc.I hope this solves the issue.
8/21/2010 11:52:59 PM •
Brother...
•
Answered
on Aug 21, 2010
Does not scan in color
Hi
Look in the program or driver settings for scanning may be selected b/w or greyscale mode. Select the color mode
8/12/2010 2:12:05 AM •
Brother...
•
Answered
on Aug 12, 2010
Hi Guys I have a Brother MFC 3360C the problem is
hi...
as you repalced please check the following.
1.check weather the catridge is been placed correctly and in correct position
2.when you get a new catridge there is a protective cover placed in the outlel of the catridge so please check weather you remoced that protective coating.
3.the outlet may be blocked by the old ink which got dried up. so please clean the outlet of the catridge and try once
if may answer was usefull please vote
7/14/2010 10:10:02 AM •
Brother...
•
Answered
on Jul 14, 2010
Cleaned printer head 12 times still can't get full
Sound familiar. Sometimes you just have to let it sit for a day or two once you have cleaned it a few times. Then clean again and see if its cleared up. Could also be getting empty even if it doesn't show it is. In the worst cases some of the print heads are majorly clogged. There are also cleaning kits you can get off the web. It's like an ink cartridge but it has cleaning fluid in it instead.
7/2/2010 5:04:24 AM •
Brother...
•
Answered
on Jul 02, 2010
Can I install printer without dvd
Hi there.
Yes you can install the printer without the dvd disc.
you can download the software from the brother website:
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=mfc3360c_all
Just select your operating system and language from the drop-down lists and it will search for the driver and software required.
Most of the time the software you need will be at the top of the page but it will have some brief information in the title, and when you click on the information & download link there will be a guide on how to un-install an old set of drivers if needed and also information on how to install the new drivers and software..
I hope that helps..
Regards
Mike
5/27/2010 1:40:27 AM •
Brother...
•
Answered
on May 27, 2010
Brother MFC-3360C error message ''PRINT UNABLE 4F .....''
Hi there
Brother 4F is this have a go it could work for you.
Access the internal maintenance mode by pressing the Menu/Set button, then press * 2 8 6 4 within 2 seconds. This should put you in the maintenance mode menu. Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.
This will reset the purge count value. Then the printer will restart, hopefully without the annoying cannot clean message.
All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
All files on my website are only there for a limited time
4/25/2010 6:42:13 PM •
Brother...
•
Answered
on Apr 25, 2010
Will not print error
Hi Ok try this it may work.
All the best good luck
1.Go Menu
Type in *2864
Type in 10
Code WSW00 shows
Type in 51
Code WSW51 0000001 will show
Try different values, eg change to 000000 or 0000010
BUT remember original code to get back to
To exit type 99
Also can try.
Solution:
· Machine off
· Switch on the machine while holding down the “menu”button until all the leds are flashing on/off. Now you are in “maintenance” mode.
· Press 80
· Press the “mono start” button several times until you see “purge: xxxx”
· Press “2783” in order to reset the purge counter. You will see: “purge:0000”
· Press the "stop" button.
· Press “99” to exit the maintenance mode.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one
All The Best: Pineworks
·
3/2/2010 8:26:19 PM •
Brother...
•
Answered
on Mar 02, 2010
Install cyan error
Error 02. Remove and re-install cyan Toner Cartridge, then turn the printer off and on. Replace cyan Toner Cartridge, then turn the printer off and on. ...
www.office.xerox.com/userdoc/P740/P740man/740.33.html
12/4/2009 11:25:53 AM •
Brother...
•
Answered
on Dec 04, 2009
Not finding what you are looking for?