20 Most Recent
Sony Cyber-shot DSC-T20 Digital Camera - Page 2 Questions & Answers
How many hours do i charge my battery dor dsc t20
Hi,
You can charge the battery of the Camera for 4 to 6 hours when used initially. For normal full recharging, it takes, 330 minutes. The practical charge time of the battery is for 270 minutes.
Thanks for using FixYa.
I have a Sony DSC
IT LOOKS LIKE YOU DAMAGED A STRIP CABLE, ITS BETTER TAKEN TO A TECHNICIAN TO BE REPLACED.
REGARDS.
DON'T FORGET TO RATE ME
Sony error formatting memory card
If available test another memory card. If not possible, try the memort card in an USB card reader on a PC or Mac. If readable - copy all pictures to a save location. Then format the memory card. On a PC choose FAT32 format and try the card again.
I have a Sper SteadyShot
Press HOME to bring up the home screen. Use cursor-left/right to select the toolbox icon. Select the hammer-and-wrench icon. Select the "A" icon.
E:61:10
Hello:
There are two micro motors that take care of the focusing. Either one or both may have become defective (open internal coils) or an electrical connection gone bad and the controller needs to see these "loads". If it doesn't see these, it sends out the error code. In the photo they are located on the left and right lower portion.
Vibrating and rattling from inside and shakey
I'm sorry that the Camera is vibrating. Sony has discovered that some DSC-T20 Cyber-shot cameras sold in the United States may experience an issue with abnormal internal vibration and an inability to properly focus and take pictures.
For cameras affected by this issue, Sony will provide free repair until July 16, 2011.
This issue affects some of the following DSC-T20 cameras sold in the United States:
- Pink or Silver cameras with serial numbers between 500001 and 525350.
To setup the service under the know issue, please call Sony customer support center at 800-784-6726.
Please click hear to view the Sony's Announcement regarding the issue.
Thanks for understanding. I hope this information enough to get the Camera fixed.
Please let me know if you require any additional help.
Dsc-t20 digicam, are problem while
Sony has discovered that some DSC-T20 Cyber-shot cameras sold in the United States may experience an issue with abnormal internal vibration and an inability to properly focus and take pictures.
For cameras affected by this issue, Sony will provide free repair until July 16, 2011.
This issue affects some of the following DSC-T20 cameras sold in the United States:
- Pink or Silver cameras with serial numbers between 500001 and 525350.
To setup the service under the know issue, please call Sony customer support center at 800-784-6726.
Please click hear to view the Sony's Announcement regarding the issue.
Thanks for understanding. I hope this information enough to get the Camera fixed.
Please let me know if you require any additional help.
How to transfer pictures from sony cyber-shot
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa ( http://picasa.google.com ).
My sony camera model no DSC-T2 vibrates as I turn
On Sony T100 and similar,
its the vibration canceling unit, i had the same problem.
if you have good hads you can fix it.( on your oun risk)
1) disasamble the camera, you will see black plastic box inside, this is he lens unit.
2) on the botom you see 2 scrwes, they are holding the CCD remove them and the ccd unit will come from the lens assembly
3) the next is the stabilizer unit it is the problematic one. it is located on the left side of the lens asebly and is held by 2 screws.
you can test it by puling out the cable connected to it (the conector is just under the lens) and verifign that the problem is solved. ( you can leave it this way it will shoot fine just without the anti shake)
4) to fix it take it out ,remove the plastic cover, you see the lens on a plastic mount it should be glued to the magnet under it. the problem is that the glue fals apart.
remove one of the pins on wich it slides, and take the lens and the magnet out.
5) reglue the magnet and reasemble the camera.
6) power up and test, for me that solved the problem
if you need more help you can mail me at adisarit(et)yahoo(dot)com this is spam mail so be prepared to wait a few days for reply.
i have a document with pictures explaining the process .....
It vibrates when you turn it on. Whats causing it
On Sony T100 and similar,
its the vibration canceling unit, i had the same problem.
if you have good hads you can fix it.( on your oun risk)
1) disasamble the camera, you will see black plastic box inside, this is he lens unit.
2) on the botom you see 2 scrwes, they are holding the CCD remove them and the ccd unit will come from the lens assembly
3) the next is the stabilizer unit it is the problematic one. it is located on the left side of the lens asebly and is held by 2 screws.
you can test it by puling out the cable connected to it (the conector is just under the lens) and verifign that the problem is solved. ( you can leave it this way it will shoot fine just without the anti shake)
4) to fix it take it out ,remove the plastic cover, you see the lens on a plastic mount it should be glued to the magnet under it. the problem is that the glue fals apart.
remove one of the pins on wich it slides, and take the lens and the magnet out.
5) reglue the magnet and reasemble the camera.
6) power up and test, for me that solved the problem
if you need more help you can mail me at adisarit(et)yahoo(dot)com this is spam mail so be prepared to wait a few days for reply.
i have a document with pictures explaining the process .....
I want to change the
You can do that by navigating the main menu of your digicam. Go to setting, camera set up, find the language then choose the language you want to change. This procedure is for typical digicam menu it may vary from one camera manufacturer and models to one another. I hope this advice help you in your problem.
Where is the usb ?
Welcome to FixYa
Hi there,
If your looking for the USB of your Sony Cyber-shot DSC-T20 Digital Camera, it is just a USB cord that your going to plug at the bottom part of the camera. This cord will be used if you want to transfer all your pictures to your computer.
If you want to know more about your Sony Cyber-shot DSC-T20 Digital Camera, just click
here for more information.
Hope this link can help you and can answered your question.
Thank You for using FixYa.
Not finding what you are looking for?