Kodak EasyShare V1003 Digital Camera - Page 9 - Answered Questions & Fixed issues

The screen must be replaced. To do it yourself, the screen will cost around $40 from virtualvillage dot com. I just did one. It took about 15 minutes. The ribbon cable is held in by a flip up lock on the main board. Otherwise, it's just remove the screws around the case and pull the bottom edges outward first.
virtualvillage uses Pay Pal only.

First thing is to start the program, then turn on camera, then connect it to usb and it should automatically upload or ask what you want to do.

camera screen cost you 100 $

Your charger is probably not working.

no the screen is not worth gettin fixed the lcd scrren usaually cost more than the camera itself does but if your camera is discont get it fixed because their will be no other camera like it

Go to a camera shop and ask them to test the charger, eventually buy a new one.

Go to Kodak.com and download an install disk for your camera model. It is free.

There is no way of fixing this camera unless you get a new lense barrel. Check out camerashyanna on ebay stores. Cheap repair service.

You probably had a bad USB connection that supllied to much voltage (or had a bad ground or reverse polarity) to the camera and shorted out the circuit board. Disconnect all cables. Hook up to a charger and try again. If this does not work, the camera is fried, sorry.

You can continue to take pictures with the camera as-is. Otherwise get the LCD screen replaced. Checkout camerashyanna on e-bay stores. They fix these for about $40-$45.

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...

Here's some things that you can do to try to correct it. They only seem to work for less than 50% of the lens errors, but if the camera is out of warranty, they're worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Go to kodak.com.

I have a Kodak EasyShare v1003 ... but no install disc, and I have a new computer .... Plz. help I really would love to upload my pic's to my computer and change info.on my Kodak . Thank You

same with my casio camera, i smacked it down after getting it stuck halfway and now i try to turn it on and it wont work. i need help.

In the settings switch from internal mem. to the card

it could be because your memory card is locked in which case on the side of the card theres a slide a different colour to the rest of the card slide it to its other postion

Maybe lens needs adjustment. The info on this page may help. Copy and paste this link for more info.


http://www.fixya.com/PostAnswer.aspx?thid=1841738&prdid=447928&ctgid=67

Maybe lens needs adjustment. The info on this page may help. Copy and paste this link for more info.


http://www.fixya.com/PostAnswer.aspx?thid=1841738&prdid=447928&ctgid=67

HERES A LINK TO A WEB SIGHT THAT HAS ABOUT EVERY USER MANUAL FOR KODAK AND ITS IN ENGLISH
http://www.kodak.com/global/en/service/publications/urg00665toc.jhtml?pq-path=7168/10511/10540

yaa it happens due to EPROM Programming error try to reset it if possible or else take immediately to its repairing center.