20 Most Recent Fuji FinePix A800 Digital Camera Questions & Answers


Loading the software is not enough. You should install it and also the drivers, provided on the disk.
But you have to do so, before connecting a camera to the computer.
If nothing helps, please try to remove the program and reinstall it again. Then connect the camera and switch the camera on.

Fuji FinePix... | Answered on Dec 18, 2014


a khoch is present which decide that device protect ot not use this koch u remove write protect

Fuji FinePix... | Answered on May 20, 2012


This camera needs to be sent away forrepairs. Just like a motor vehicle, some repairs to your camera require atechnical specialist to fix your problem.

Fuji FinePix... | Answered on Apr 19, 2012


A driver for the camera will be found on Fuji's website, look for Customer Support or somesuch heading.

Fuji FinePix... | Answered on Oct 01, 2011


Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa ( http://picasa.google.com ).

Fuji FinePix... | Answered on Jul 12, 2011


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa ( http://picasa.google.com ).

Fuji FinePix... | Answered on Apr 15, 2011


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use Windows Photo Gallery or any other photo cataloging program.

Fuji FinePix... | Answered on Mar 31, 2011


If an icon appears on your desktop or a "removable disc" appears in "my computer", double-click on it and your picture files should open. You can select them and then drag and drop them into a folder you create on your desktop. From there, you can send them to finepix viewer or any other program of your choice.

Fuji FinePix... | Answered on Mar 08, 2011


This just happened to our camera. The AV connector was pushed to the side, and the LCD stopped working. My daughter pulled the little metal AV connector back to the original position and the camera works now, but the connector is damaged. I'm sure I'll have to take it to be repaired. I hope it doesn't cost as much as the camera. How did you solve it?

Fuji FinePix... | Answered on Mar 05, 2011


This camera will not deface your photos by putting a date on top of them, but it does store the information in the file. You can choose to print the date when you print the photo. Depending on the printer and program, you can have the date printed on the photo, in the margins, or on the back. Please refer to the documentation for whatever program you're using to print for full details.

Fuji FinePix... | Answered on Feb 25, 2011


Take the memory card out of your camera and look at it. SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.

If that doesn't work, try another card.

Fuji FinePix... | Answered on Feb 15, 2011


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Fuji FinePix... | Answered on Feb 09, 2011


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Fuji FinePix... | Answered on Nov 09, 2010


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Fuji FinePix... | Answered on Sep 30, 2010


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Fuji FinePix... | Answered on Sep 27, 2010


Ok, yes you need to download and install the Fuli FinePix software from this link below.

Download and install this software then reboot, at desktop next, connect up camera,it should install the driver, then when done, reboot, this time at desktop, run the software and you will be able to copy and manipulate your camera.
Also when the drivers have been installed, you will see new "Drives" appear in My Computer, now as such, these drives can be used as a normal drive, copy/cut/paste from to anywhere so also you can use that to transfer files too.
http://www.fujifilm.com/support/digital_cameras/software/finepix_viewer/index.html#windows5.5

There is also a firmware update for your camera too... Below.
http://www.fujifilm.com/support/digital_cameras/software/firmware/a/finepix_a800/fupd.html

Support link below.
http://www.fujifilmusa.com/support/ServiceSupportProduct.do?prodcat=862210

Fuji FinePix... | Answered on Sep 12, 2010


Hello Scotty,

Is this the first time you have encountered the problem? Also, how long have you had this camera? Do you recall anything which could have caused the issue?

Looking forward to your response.

Fuji FinePix... | Answered on Sep 09, 2010


hi, the memory card you are using is to small for the camera it has not got enough memory on it you need to get at least a 1gb memory card or 2gb memory this will then allow you to take between 500 and 1000 pictures the 16mb card you have in is not worth using it will only hold a couple of pictures so go to the well known auction site and buy a 2gb memory card of the same type such as sd card or micro sd or mini sd it should tell you on the 16mb card what type it is then just buy the same type but with either 1gb or 2gb or even 4gb of memory this will then let you take 1000s of pictures

the 16mb card is no good in your camera get a bigger card and your problem will be solved

let me know if you have any problems with the new card ok

Fuji FinePix... | Answered on Aug 15, 2010

Not finding what you are looking for?
Fuji FinePix A800 Digital Camera Logo

57 questions posted

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

Ekse

Level 3 Expert

13434 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4808 Answers

FIKRET UNALIR
FIKRET UNALIR

Level 1 Expert

239 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

FinePix Fuji

  • FinePix Fuji

Most Popular Question

camera says zoom error work please

  • Cameras
Loading...