20 Most Recent Hitachi 55HDX99 55 in. Plasma HDTV - Page 9 Questions & Answers

0 Answers

Hitachi LE50H508 TV. When in standby red indicator light is on. When I press power button on remote (or TV) indicator light goes out and it takes anywhere from 15 to 45 min for the screen to turn on

Hitachi... | Posted on Jan 17, 2018 | Be the first to answer

1 Answer

I have a Hitachi 55' LE55A6R9A. I get power and Audio, but no picture.I ordered complete LED TV Repair Parts Kit SKU:sj-KIT-LE55A6R9-K1.Installed the parts, but no change. What should I do next?

http://www.shopjimmy.com/hitachi-le55a6r9-complete-tv-repair-kit-version-1.htm

Hitachi... | Answered on Jan 17, 2018

1 Answer

How do I get radio stations on my hitachi smart tv? Any help would be appreciated.

If there isn't a button on the remote to do it, go to your TV channel guide and go to the high channel numbers. In the UK they are usually in the 700 range of numbers.

Hitachi... | Answered on Jan 16, 2018

0 Answers

How do I get radio stations on my hitachi smart tv?

Hitachi... | Posted on Jan 16, 2018 | Be the first to answer

0 Answers

Hi I am looking for a pert for my hitachi fridge

Hitachi... | Posted on Jan 16, 2018 | Be the first to answer

0 Answers

Hitachi tv 50", Model# P42H401, my tv has an enlarged picture and does not "fit" the screen size, so we loose some viewing of shows and wording.

Hitachi... | Posted on Jan 15, 2018 | Be the first to answer

1 Answer

My hitachi 42" smart tv that I have had for just under 3 years has suddenly got no picture...I can change channels and hear what's on just seeing a black screen...

Take a flash light and shine it on the tv screen at an angle . if you see any picture then the problem is with the backlight or the power supply for the back light.
if you see nothing then the problem is somewhere else. it can be the T-con board or the lcd panel itself.

Hitachi... | Answered on Jan 14, 2018

1 Answer

I put the tv on standby last night tried to switch on this morning and cannot get anything no lights etc any ideas?

i guess you burnt the power already or check the plug and change the fuse in the plug . see what happens

Hitachi... | Answered on Jan 13, 2018

0 Answers

Why does my tv keep turning to standby?

Hitachi... | Posted on Jan 10, 2018 | Be the first to answer

1 Answer

Hitachi LE55A6R9A audio no picture(can hold light near screen and see picture)

Test LED output voltage, if its missing look at the power board as being bad, also test the PWM voltage and make sure its between 2 and 4 volts, if its not correct the main board may be bad.

Hitachi... | Answered on Jan 06, 2018

0 Answers

HI there,I have a Hitachi LCD rear projection TV, model 50C10. The lamp cooling fan continues to run after the TV shuts down. There is no heat at the lamp.Are there any ideas why this fan is still on.

Hitachi... | Posted on Jan 05, 2018 | Be the first to answer

0 Answers

Cant get the information across bottom of screen. It just saysno info. Its a new Hitachi tv

Do a hard reset to this TV, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Hitachi... | Answered on Dec 28, 2017

1 Answer

How to fix black screen on Hitachi flat screen

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main digital board.

Hitachi... | Answered on Dec 28, 2017

2 Answers