20 Most Recent Sylvania LD-200SL8 20 in. EDTV LCD Television - Page 6 Questions & Answers


Partial answer, right click anywhere on a blank area f laptop screen, go to properties an left click, you should see options for adding a external screen, add it. You can also locate the tiny screen emblem on upper keys on the laptop and press this key while plugging in the HDMI cord this sometimes will do the trick. Also get the source menu up on TV and choose HDMI 1 good luck.

Sylvania... | Answered on Aug 11, 2018


Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/ /

Sylvania... | Answered on Aug 09, 2018


First, I'm not a Sylvania representative.
* Model #s and brand of remote and TV for specific solutions.
* You will need to check your 5-1 remote papers (or web site) for the Sylvania TV codes.
* Set up your remote with the correct code (or use code search function)
* Note the TV in the picture is an older "Tube" screen model. The current (New) remotes may not work for this older model. You will need to check the remote specs
* Example of remotes and Sylvania TV models that are current; https://www.amazon.com/Sylvania-NH000UD-Replacement-Remote-Control/dp/B005DNS0EM

Aloha, ukeboy57

Sylvania... | Answered on Jul 27, 2018


I think I cracked the code on this inexpensive but potentially infuriating little clock.When you first plug it in, it goes into STANDBY mode (identified by flashing ":" in the time display). In this mode, you set the time, alarms, preset radio stations, etc.
Once these are set, you go into NORMAL mode by pressing the SOURCE button (in the back row). In NORMAL mode, the : in the time display is steady. In different modes, the middle row and front row buttons do different things.
To return to STANDBY, you have to unplug the cord briefly and plug it back in. In STANDBY, the (front row buttons) AL-1 & AL-2 allow you to "cycle through" [buzzer-radio-off ] options for each alarm , and alter the time setting for each alarm (middle buttons). Once set, just wait and it will accept the new setting and display.
In NORMAL, the front row buttons raise or lower the volume of the radio. CAUTION: if you chose the radio setting for an alarm, and set the volume to 0, it will not wake you up! The middle row buttons only do anything when the radio is playing (SOURCE in the back row), when they can be used to tune the radio up and down, or move to preset station. Note that the SOURCE button is also used to select Blutooth sync, indicated by the blinking Bluetooth light on the right side of the display. To stop this from blinking, press SOURCE until AU (for auxiliary) appears and simply wait until it returns to NORMAL display.
Hope that helps.

Sylvania... | Answered on Jul 24, 2018


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
{View the site in web view or by a desktop to see the search box. Mobile view has no search box.}/

Sylvania... | Answered on Jul 15, 2018


I know of no reset.

Sylvania... | Answered on Jun 28, 2018


go to store[s] that sell electronics and look for an adapter --or online search for an adapter

Sylvania... | Answered on Jun 20, 2018

Not finding what you are looking for?
Sylvania LD-200SL8 20 in. EDTV LCD Television Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sylvania Televison & Video

  • Sylvania Televison & Video

Most Popular Question

need setup codes sylvania ld200sl8

  • Televison & Video
Loading...