20 Most Recent HP Deskjet D2360 InkJet Printer - Page 2 Questions & Answers

go to manufacture web site download drivers for free

1. check that ur usb cable is working by changing with a new one2. remove d black cartridge n close door/lid3. if no response, do same wit color cartridge4. insert into another usb port on computer5. if no response still, remove cartridges and clean printer interface with a cotton wool and methylated spirit

you will have to dismantle the entire machine to remove the axle that holds the cradle in place , and remove the cradle and then you would be able to fit the belt back

1. Remove the paper from the paper tray.
2. Press the Power button and then wait for the jam to clear.
• If the paper jam cleared, try the print job again.
• If the paper jam is not resolved, continue.
3. Remove the rear access door. Press the handle to the right, and then pull out the door.
4. Remove any paper that is inside the printer by pulling the paper out from the back of the printer.
5. Replace the rear access door.
6. If the paper jam cannot be removed from the back of the printer, raise the product cover, carefully remove the jam from the front of the product, and then lower the cover.
7. Re-load the paper in the In tray. Fanning the paper makes sure that the pages are not stuck together.
8. Press the Power button ( ) to turn on the product.
9. Open the document in the application in which it was created.
10. Click File, Print, Properties, Printing Preferences click Paper/Quality tab.
11. Verify that the type of paper specified in the Type is text box matches the type of paper being used. A paper jam might result if photo paper is specified in the Printer Properties dialog box, but plain paper is loaded in the printer.
12. Click OK to try job again.

Go to HP.COM on the Internet and download the Windows 7 drivers. If that doesn't work try the Generic driver.

take out the ink and on a soft cloth wipe the printhead down 3 times then do a cleaning on the machine

I also own an HP D2360. I had the same problem with eyang and vinerc. I brought the printer to a computer technician and he told me that my color cartridge is busted and needs to be replaced. I bought
a new color cartridge and presto! My printer is working fine.

ftp://ftp.hp.com/pub/softlib/software7/COL15814/dj-41763-1/TF_regna_pse_only.exe - xp driver

ftp://ftp.hp.com/pub/softlib/software8/COL18384/dj-47558-1/SF_CDA_Full_Non-Network_enu.exe - Vista driver

if helped rate fixya

You do not mention which operating system, but you can download drivers for XP, Vista, Windows 2K, Mac and Linux from HP's website here.

Regards,
Bob Headrick, Microsoft MVP Printing/Imaging

CHECK THE PRINT CARTRIDES.

>Refill cartridges causes slow print.. replace with new one

You can download the printer software/driver that you need from this link, just click HERE and proceed with the download.

You can download the HP printer drivers from their supportWEB site. Please click on this link and select your model printer to download:-http://welcome.hp.com/country/us/en/support.html

Go to printer icon >>>right click go to properties >>>then go to tools >>> click on the configuration to set repair your printer...If the problem still persist call a technician to clean the nozzle of the printer

Unable to find the encoder by the carriage assm, clean encoder & encoder reader sensor. (encoder is just like a film printed with lines on it, located behind the cartridge carrier)

In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken .

Thank you for using Fixya

if the printer is showing offline on your system but printer is on, then the data cord may be defective, the wire which is connected between your pc & printer. u need to replace it. while replacing make sure both pc & printer are turned off from mains. if the printer is not showing on indication(light) then there may be fault in power supply of your printer. get it replaced.