20 Most Recent CyberLink SW- DVD Software Power DVD (SWPOWERDVD) DVD Drive Questions & Answers


please make sure you have properly installed your sound card drivers..
check this by playing any other music file
it you hear some sound then download this codec pack and install it

Thnx and i hope this helps
Please rate this solution

CyberLink SW-... | Answered on Mar 19, 2020


yeah you should install the video codec for playing the divX videos..
either download and install KLM CODEC pack

or you can use VLC player which plays literally all the formats of multimedia..

thankyou

CyberLink SW-... | Answered on Nov 14, 2019


Did you try reinstalling the power DVD software?

CyberLink SW-... | Answered on May 24, 2019


Click start control panel,administrive tools,computer management,device manager scroll to cd/dvd rom drives right click properties then properties again then tick enable cd digital cd audio for this cd rom device or scroll to dvd regions select the no _ for your specific area
If this does not fix the problem you might try

you might have to physically unplug the leads for this cd-rom then plug them back in this should activate the found new hardware wizard or
you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device

click start control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you will see options to update driver,roll back driver,or
select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall

make sure that the cd-dvd burner is getting enough power test all leads that are attached to the dvd drive including electrical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or

if this does not fix the problem it might be a registry problem
Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak
If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer
Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.


hope this helps you

CyberLink SW-... | Answered on Sep 30, 2011


Do you experience any type or error messages? What are the symptoms of your issue? Does it freeze?

CyberLink SW-... | Answered on Jun 20, 2011




make sure all leads that are attached to your cd/dvd have secure connections and are not faulty or just replace them they are probably old and faulty ?
Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer
Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak
If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer

Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

hope this helps


CyberLink SW-... | Answered on Apr 20, 2011


click start run type cmd then type chkdsk/r/f which will scan for and attempt to repair any bad sectors and automatically fix any corrupt files on your hard drive or
click start control panel administrive tools,computer management ,disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now,start should schedule this task when restart
do not do anything while the chkdsk utility is in progress any input may damage your computer
then defragment your hard drive
hope this helps

CyberLink SW-... | Answered on Apr 05, 2011


Hi,

Welcome to FixYa! Since you said it's able to play dvd before, you can go ahead and try to do a System Restore going back to the time when the computer is able to play dvd. Or, you can go ahead and access the registry and change some settings. Last option is to run the Autofix from Microsoft.

How to do a System Restore:

1. Click Start

2. Click All Programs

3. Click Accessories

4. Click System Tools

5. Click System Restore

6. Choose a Restore Point or Date when you think that the laptop is able to play DVD

7. Click Start

This is gonna be a bit complicated since were going to access your registry, but just follow all the steps and it will be much easier.

1. Click on START

2. Type REGEDIT on the search bar on START Menu on the Run Box

3. Expand HKEY_LOCAL_MACHINE

4. Expand SYSTEM

5. Expand CurrentControlSet

6. Expand Control

7. Expand Class

8. Click {4D36E965-E325-11CE-BFC1-08002BE10318}

9. Look for the Upper Filters / right click on it / click on Delete

10. Look for the Lower Filters / right click on it / click on Delete

11. Restart PC

12. Try you CD / DVD ROM

If nothing happens, click on this link then click on RUN and follow the steps, then restart computer and try to run a disc again, if still nothing happens, theres a possibility that the problem is with the hardware side or the media player that you are you using...

Hope this will help...Thank you for using Fixya...

CyberLink SW-... | Answered on Mar 01, 2011


Hi ,
Please try this from http://www.videolan.org/vlc/
Works fine and yes , it's free .
Thanks for using Fix Ya .

CyberLink SW-... | Answered on Jan 15, 2011


click start run type in cmd then type chkdsk/f which will reboot and automatically fix corrupted files
hope this helps

CyberLink SW-... | Answered on Sep 24, 2010


http://www.uuaide.com/
It is unavoidable that runtime errors, .exe errors, dll errors, missing dll files, Internet errors, blue screen of death would annoy you after you used your computer for a few of years. Additionally, you probably will find you get a slow computer and have to reinstall your operating system.

CyberLink SW-... | Answered on Sep 06, 2010


Hello,
Unfortunately, Fixya does not provide keys as it is illegal. You need to purchase a license for this software.

CyberLink SW-... | Answered on Jul 16, 2010


i had the same problem. your disc is the wrong format, or your burner is not working correctly. i hope this helped

CyberLink SW-... | Answered on Jun 14, 2010


had the same issue. the problem could possibly be:

bad disc burner
wrong disc format
or simply the quality of the program

i had this issue with power director 7.0 and i payed for upgrades and it worked fine. the quality is poor with these programs, and instead of wasting time fixing it, i would suggest investing in a pc or mac disc software for making movies. my power director came with my computer, but if you purchased yours, i would take a look at your burner or disc. overall, i think this program has poor quality, and its not worth your time. i hope this helped, and if you wish to continue using this software, look into the following problems above.


CyberLink SW-... | Answered on Jun 14, 2010


same thing happened 2 me but with power director 7.0 i need help 2. i worked a total of 5 hours on a movie and i can't burn it. somebody help us!!

CyberLink SW-... | Answered on Jun 14, 2010


This is illegal. Please buy this product.

CyberLink SW-... | Answered on Jun 12, 2010

Not finding what you are looking for?
Computers & Internet Logo

66 questions posted

Ask a Question

Usually answered in minutes!

Top CyberLink Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Cindy Wells

Level 3 Expert

6164 Answers

Are you a CyberLink Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

CyberLink Computers & Internet

  • CyberLink Computers & Internet

Most Popular Question

cyberlink power dvd correctly read some

  • Computers & Internet
Loading...