Top 20 Epson Stylus 1400 InkJet Photo Printer Questions & Answers

Turn off the power at the wall for 10 minutes.

Solving Problems - Epson

https://files.support.epson.com > Probsolv.5.1.html If your Epson Stylus Photo 1400 has any problems, see these sections for ... you're trying to print a large image, your computer may not have enough memory.

• Stylus Photo 1400 - User's Guide - Epson

  https://files.support.epson.com > pdf > pho140 PDF You can also press the ) paper button on your printer to cancel printing. Selecting Default Settings. When you change the printer settings within a program, ...

The cleaning unit may still be engaged with the cartridge carriage. There may be a release mechanism on the side of the cleaning unit. The cover will have to be removed to see if that is the case. Another cause could be that the shaft or rail that the carriage travels on is quite dirty. It can be cleaned with alcohol to remove the dirt. That might be what is loading down the motor. Good Luck.

Paper is loaded for printing, but the CD/DVD tray guide is open.If you want to print on paper, close the CD/DVD tray guide. If you want to print on a CD or DVD, remove the paper from the sheet feeder.

Hi this can mean number of things, but most likely your 'waste ink' tank is full. You need to either get the printer serviced or reset the ink counter. You can find more information and link to a reset utility here: http://inkbank.com.au/webcontent22.htm good luck!

Hi Sharon, This may be an error. Shutdown the computer and re-seat cartridges to be sure they are connecting to the cartridge carriages properly. Once cartridge replacement procedure completes, close all the access panels. Now shut off the power to the printer by unplugging it or by turning off the power bar it's plugged into. Don't use the printer's power switch! Now, plug the printer back in. Reboot your computer. And then, turn on the printer and let it complete the initialization process. Hope it will help. You can also follow us for more info and support Epson Printer Support Epson Technical Support Epson Phone Support Online...

Turn on printer, and unplug power chord while the carriage moving. Then move carriage by hand freely.

JUST DO THE GENERAL SERVICE CLEAN THE SENSORS THE ERROR WILL CLEAR.

THERE'S NO PAPER ADJUSTMENT LEVER ON THESE PRINTER,THE OPTION MEDIA PAPER ARE GIVEN THERE EITHER PLAIN,PHOTO,MATTE.

TRY TO CLEAN THE CHIP ON THE CATRIDGE AND REINSTALL IT AGAIN,CHECK THE PIN IN THE CARRIAGE IF ALL ARE O.K

If the lines are vertical to the direction of the printhead movement, you need to clean the paper rollers and the small "pizza wheels" of your printer. Also check for any traces of stuck paper in the paper path. I recon you ars not using genuine inks, right? Try to slow down your print speed by selecting a best quality setting. If the lines are parallel to the printhead movement, your printhead is either clogged our stuck.

Check for any small paper jam. Check the rollers, also use an alcohol swab to clean the rollers and check for ink leaking. Check you ink pad, it could be time for a new one.

Borderless print ?Set custom page as exactly paper size. Set borderless expansion to max. Select appropriate paper media type.

I'm guessing you may have tried these already but in case you haven't

1. Try a different compatible power cable, preferably one that is known to work already
2. Test the power socket with a known working device to ensure the socket works

It's entirely possible the problem isn't the power supply but the power button on the printer so some basic disassembly to access the button panel may identify something like a slipped wire or ribbon cable.I wouldn't recommend disassembly to remove and check the power supply/transformer itself as they invariably contain capacitors which you should never mess with.Hope that's of some help.

again how do i unblock the ink jets

I really need more information to better help you. Are you trying to install from a disk? If so, try downloading and installing directly from the Epson websites driver page listed below. The link is already set up for your printer. Just choose your computers operating system and download from the link. http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=79609&infoType=Downloads

It PW sensor error. For "Normal Quality" mode, the PW sensor will not work for "reading" paper existence, but for "Fine", photo and best photo it work. PW is paper widht. Small sensor at bottom side of carriage, near the head. Dirty or short circuit may be.... Can you fix it?

download the driver from epson.For example I downloaded epson375130eu for a stylus dx4450.then right click on the downloaded file and select "solve compatibility problems", select fix the program, select program was working with previous windows versions, select xp.you should be able to have the ink levels. At least it worked for my dx4450

both the paper/ink buttons blinking in red simultaneously means fatal error. Use AP for figure the latest fatal error code. Btw, i have Service manual for 1400. Contact me at aicaxz(at)yahoo(dot)com

R350 type my printer,not respont end error in display