20 Most Recent
Dell 1815dn All-In-One Laser Printer - Page 6 Questions & Answers
Saying : fuser door open - but it is not
Hey, make sure the rear door is shut, if it is, you most likely need to replace the High Voltage Power Supply (Part# WH773). Iteminc.com has this part and can ship same day. The sensor which reads if the door is open can go bad and it is part of the HVPS. Good luck!
Fuser door open on dell 1815n
If you have tried closing the fuser door (rear door) several times and the error continues. You most likely need to replace the High Voltage Power Supply (Part# WH773). Iteminc.com has this part and can ship same day. The sensor which reads if the door is open can go bad and it is part of the HVPS. Good luck!
My printer is sayng the
Hey, make sure the rear door is shut, if it is, you most likely need to replace the High Voltage Power Supply (Part# WH773). Iteminc.com has this part and can ship same day. The sensor which reads if the door is open can go bad and it is a part of the HVPS. Here is a video that explains this error and shows you how to replace it. Hope it helps. Good luck!
ADF does not "grab" paper. Replaced pickup
Hey, If you have a ADF jam you should replace the pickup assembly (part# D1815-Z3) as well as the separation pad (part# D1815-Z4). Here is a video I made that shows you how. Iteminc.com has these parts and ships same day. Hope it helps!
I have a Dell 1815dn
Hey, make sure the front door is shut, if it is, you most likely need to replace the High Voltage Power Supply (Part# WH773). Iteminc.com has this part and can ship same day. The sensor which reads if the door is open can go bad and it is part of the HVPS.
Where is the fuse door open
The fuser door is located on the back of the machine. If that door is shut but you are still receiving this error, you should replace the High Voltage Power Supply because the fuser door sensor is a part of this board. You can order this part from Iteminc.com (part# WH773). GOOD LUCK!
The copier reads fuser door
If the back door is shut and the fuser seems in place you need to replace the High Voltage Power Supply. The fuser door switch is part of the High voltage power supply. Replacing the HVPS should fix this right up. Hope it helps!
The fuser door is stating
That is a problem with the fuser door switch which is a part of the High voltage power supply. Replacing the HVPS should fix this right up.
Dell 1815 keeps saying door
The front door switch has gone bad which is part of the High Voltage Power Supply. You need to replace the HVPS (part# WH773). This should clear your problem right up. Iteminc.com has this part and ships same day.
Fax says Open Heat Error
This is a problem with the Fuser (Part# UG297). Replacing the fuser should clear this right up. Here is a video I made that will show you how. Iteminc.com has this item in stock and ships same day. Hope it helps!
">
Show me how to replace a fuser in a dell mfp 1815
Pull down the rear door. There should be 2 screws on either side.....remove them....look for 2 more screws towards the bottom. Remove them....the entire rear plastic of the machine should pull off...exposing the fuser. Remove the screws holding the fuser in place. Pull the connectors from the power supply below and you should be able to pull the fuser out! If you need a fuser you can get one at www.getthatpart.com they have good used fusers at good prices....you can also call them at 410-374-1261
Open Heat Error\Call Service
Your Dell 1815DN is made by Samsung. It is a model ML3051ND. Maybe you can find a Samsung dealer in OKC. I would love to help but I am in Wellington, Ks. and the trip charge would be expensive.
Your machine needs a fusing unit. Kind of a pricy part at around $185 so parts and labor locally will cost you around $250
Good Luck and Thank You for using Fixya.
On 2/1 and then again on 2/3 we have received an
Any heat errors on the dell 1815 means the fuser has gone bad. Your best bet is to replace the fuser, part # UG297. Here is a video that shows you how to replace it. Iteminc.com has these in stock and ships same day (till 7pm est). Hope this helps, Good luck!
">
Dell 1815dn error code
Disassemble fuser and inspect thermistor, thermostat and heat lamp. Replace broken part.
My dell 1815dn when printing
This is most probably a corrupt driver so try the following:
1. Open Printers and Faxes on your computer and delete the driver for your printer. Then go to dell.com and open the drivers and downloads tab. Download and reinstall your printer. If the printer is still printing out symbols, it's most likely either a problem with your connection or with the printer's hardware.
2. Try using a different cable to connect the printer and computer. If you don't have one, connect and install the printer to another computer. If this stops the symbols then you will need to buy a new cable. If it does not then it is most likely a problem with the printer's hardware and you will need to get the printer serviced.
Thank you for using FixYa!
Not finding what you are looking for?