Top 20
Canon PIXMA MP460 All-In-One InkJet Printer Questions & Answers
How to fix error code 5010
- Turn off the printer by pressing the ON/OFF button.
The above illustration shows a PIXMA MX372.
- Unplug the power cord.
- Plug the power cord back in and then press the ON/OFF button.
- If powering off the printer and back on does not clear the error GO https://support.usa.canon.com/kb/index?page=content&id=ART146887
HOW RESET INK RESERVE
I am assuming this has occurred because you have either refilled an original cartridge or bought after market cartridges that Canon does not recognize. Manufacturers don't like us doing that - after all, they sell us the printers at a loss and expect to get their money back with all the overpriced ink we will have to buy later on. That said, I was able to find this info on another site. I don't guarantee it will work. Read carefully, there are a few warnings in the procedure. Use at your own risk.
Try this:
1. Turn off the printer
2. Hold the Resume Button (red circle in the triangle), add a printer (click "Power") an indicator light green.
3. Hold the Power Button, release the Resume Button.
4. Not releasing the Power Button, double click "Resume" and release Both Buttons.
5. Click "Resume" for Four times
6. Once you click "Power", to confirm the selected action (reset counter absorber). To disable the printer "Power" button to click again.
If that doesn't work, then try changing the printer setup as below.
Case 1) When the window of "Ink is running low" appears.
- Click the 'OK' or 'out of paper' button on your printer
- When the window of 'Ink has run out' appears, follow the procedures
'Case 2' below.
Case 2) When the window of "Ink has run out" appears.
- Click the 'Yes' button on the window.
- When the massage of "Press and hold the 'Stop/ Reset' button...."
appears, press and hold the 'Stop/ Reset' or 'out of paper' button
on your printer for 10 seconds.
Before using the printer, run the "head cleaning" process.
?? Warning: The level warning system of the refilled cartridge will be
deactivated permanently. Refill the cartridge only when the print quality
begins to deteriorate and the cartridge is actually out of ink.
How do I fix a Canon MP460 printer that feeds multiple sheets at a time, even for a one-page document, causing a paper jam?
Assumed you have cleaned out the feeding slot and sprockets that turn the feeder wheels. Often there's some piece of paper or gunk. One option that likely applies to most printers -- from another HP online source: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00190540&cc=us&dlc=en&lc=en
- Look for paper that might have jammed inside the product. Use a flashlight to carefully view the areas around the rollers. Remove all traces of paper found.
- Wipe the rubber paper-feed rollers with a lint-free cloth lightly moistened with distilled or bottled water. Rotate the rollers up carefully to clean all the way around.
- Look for the paper pick roller farther inside the rear access area.
The paper pick roller
IMPORTANT : The paper pick roller is a bit more difficult to reach; however, it is the most important part to clean. Make sure to clean it thoroughly. If this roller is not clean, the issue will likely continue.
- Clean the paper pick roller with a cotton swab moistened with distilled or bottled water. Apply a moderate amount of pressure to make sure that you remove all debris. Clean the roller thoroughly all the way around.
Figure 8: Clean the paper pick roller
[img border="0" src="http://h10025.www1.hp.com/ewfrf-JAVA/Doc/images/855/c01996641.gif" alt="Photo of cleaning the paper pick roller." title="Photo of cleaning the paper pick roller.">
- Make sure that the rollers on the rear access door or duplexer are clean and in good condition. If any are missing, stuck, or loose, replace the rear access door or duplexer with a new one.
Figure 9: Rear access door rollers
[img border="0" src="http://h10025.www1.hp.com/ewfrf-JAVA/Doc/images/968/c01977887.gif" alt="Graphic of the rear access door and paper rollers" title="Graphic of the rear access door and paper rollers">
- Allow the rollers to dry completely, and then replace the rear access door or duplexer.
Slide the rear access door or duplexer into place, and then gently push it in until it clicks or snaps into place.
Mp460
this driver is not ins
Cannot view document on screen after scanning
First look at the settings within the scanner and see if you can save it directly to the program of your choice. You may have to browse to find an appropriate program. Saving documents and pictures directly to your desktop helps to find it more easily. When you find the photo or document you have scanned, Right Click, Open With, and select a program like Windows Photo Viewer or Windows Photo Gallery. In that same window, check the option near the bottom that says Always Open With
Can't print in color on canon mp480
When you go to print theres and option for all black ink. Turn it off by pretending to press print go to that section and unmark the box for black ink/ print in black and white.
Paper feeder pulls multiple sheets of paper
PULL ALL PAPER OUT OF MACHINE EVEN THE SUPPLY, UNPLUG OR TURN OFF THE POWER TO THE UNIT, PUT A STACK OF PAPER IN THE SUPPLY TRAY & GENTLY PUSH FORWARD NOT FORCING IT UNTIL IT STOPS. TURN POWER BACK ON & TRY AGAIN. YOU MAY HAVE TO REPEAT THIS 2-4 TIMES BUT IT WORKED FOR MY HP DESKJET F4180 ALL IN ONE.
Printer wont reconise ink cartrige
Make sure you've removed the protective tape from the cartridges that you inserted into the printer and that the cartridges were
installed properly. Are you getting an error message or is the printer just not printing? If you get an error such as
Error U041 or U043, the printer may just be low on ink or have a bad ink cartridge.
Error 5100 cannon mp460
The root cause of Error 5100 in Canon inkjet printers can be so varied and so the solutions. If you want to read a best and well researched article on this topic, read it here:Canon Error 5100
Not finding what you are looking for?