when ever i want to print any file the printer it dose well for the first printing , but when i do an other printing request it dosent do it
and it remaining on printing state , and when i try to pause or cancel the operation it gives me this error message :
operation could not be completed (error 0x00000005)access is denied .
Posted by dimen on
This worked for me. Go to control panel, look for printer in the hardware and sound section. click on it. Right clikc on it, and run as administrator. Cancel all documents, and that should be good.
Posted on Mar 06, 2009
hp office jet j5780 cartridge error: cartridge on right must be replaced
Posted by chrisdad on
Switch off, Remove catridge and Clean any leakage in the printer.
Clean the catridge with saliva if u do not have any cleaning liquide. Put the catridges back switch on and you are there. My hardware officer just tried it this morning and it worked like magic.
Note make sure all leakages are removed.
Posted on Jan 13, 2010
i just installed ink cartridge and closed top cover to align the print cartridges but screen says to close print cartridge access door
Posted by islanderjh... on
I have an HP Officejet 6210 All-in-One. When you open the print cartridge access door there is a black toggle switch that needs to be in the depressed position to let the unit know the door is closed. Something was missing from the topside of the "door" so the switch didn't close. I simply stuffed in some foam material to close this, and the unit operates normally. You will need to remove this when changing cartridges, then replace it again.
Posted on Sep 08, 2010
Have been trying to scan but continue to receive this error message - NO SCAN OPTIONS. Read all the comments from others with this problem so I went to HP Solution Center. Rec'd this message when trying to open that program - NO HP DEVICES HAVE BEEN DETECTED. HPS SOL. CTR WILL CLOSE NOW. Can you suggest any remidies?
Posted by smilingbun... on
Problem Solved. I'm not sure what exactly was the answer but here is the steps I followed. First I went to the HP website and followed their procedure to uninstall hidden devices (namely duplicate HP devices). I uninstalled all of the devices. Then (with the USB cable still attached) I deleted the Printer and Scanner from Control Panel. At this point I disconnected the USB cable (the cable worked but the software wouldn't recognize the cable was attached). With the cable unattached, I uninstalled all the HP software with the 'remove software' program in control panel. The I used the original disk for the printer and reinstalled the software. Eventually the installation process prompted me to reinstall the USB cable. It was at this point the software started to recognize the cable again. And here is the best part, after the software finished installing the 'Scan To' button started working correctly!!!!
Posted on Mar 01, 2008
There is no 'adminstrator' so saying that it can't be done unless the 'adminstrator' installs is wrong.
What can I do?
Posted by JaniceLynn on
there's always an administrator (even if it's the one and only user).
what version of windows? (I'm assuming windows).
if Vista you can try to run the installer as administrator (find the install program, right-click, choose run as administrator).
Posted on Apr 07, 2009
I tried to connect it to my network, and it does not work. Is there a compatible print server available? Or, can I get an adaptor that will connect the USB port to the ethernet?
Posted by patrickq on
What you are saying will not work . The J5780 only connects with a USB. It does not have a J45 connection. So to play with the "built in network server" would do nothing. You would have to have some way to convert the USB to a J45 so he could hook it to his Wireless Router. His only alternative is to hook it to another computer that is used as a Wireless Slave that is shared or to get a print server. Hower, Belkin does make a wireless USB Hub that converts 5 USB's to J45 and can be hooked to you Wireless Router. It also has a built in Print Server. You can take this device and instead of hooking it J45 to the Router you can hook it to a linksys Bridge and now the USB HUB from Belkin becomes completely wireless. And has a Print server to boot! The model number are Belkin "Network USB Hub" and the Linksys WET54G.
Since the Hub connects to the USB devices and then converts them to a J45, to link to a network you can hook it to the llinksys device and convert it to a wireless network usb hub. It also has a print server built in.
It works. I own the same printer all in one and if you search on the internet you can pick up both devices on the cheap.
Posted on Jan 16, 2009
I have opened the lid and cannot see any obstructions. I have removed and reinstalled the cartridges themselves
Posted by nedsuffern on
We have several of these in our company and the most common "Carriage Jam" cause is a glob of black ink in the bay on the right side. Once glob is removed, and "Carriage Jam" message appears again, press OK, and it prints fine from then on. Today the black ink glob was flat on top. Watch out for leaky cartridges, as the design of the particular HP device provides a nice catch pan for the tri-color ink cartridge, but not for the black one, so a leaky cartridge, besides being expensive and wasteful, can goop up the bay causing the carriage jam error message to try to get you to take a closer look.
Posted on May 05, 2010
The power button and exclamation mark light keep blinking while it tells me to turn off and then turn power on but when i do this the same thing happens again. Also the copy quality lights all blink repeatedly. Ive tried setting it up again but this doesnt work
Posted by johnglenn8... on
Perform a partial reset of the HP All-in-One
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
Posted on May 03, 2009
Basically I have installed everything Exactly how HP say it should be done, I can print and eveything exept I cannot scan.
This is really bugging me and the reason I bought this all in one is for the scanner..
Posted by saganic0 on
it means that te software for the scanner is not properly installed or corrupted,reinstalling the software will solve
Posted on Feb 15, 2008
I am getting an error "Cartridge error : cartridge on right must be replaced". Cartridge is more than 50% full. Have tried removing cartridge and replacing back but with not success.
Posted by ranjanamal... on
I had the same problem. The only difference is that I decided to try using an XL cartridge to save money on ink. This is what caused my error message. After exchanging the XL and replacing it with the regular size cartridge the error message went away.
Posted on Oct 07, 2008
514 questions posted
Usually answered in minutes!