20 Most Recent Casio Exilim Zoom EX-Z700 Digital Camera - Page 6 Questions & Answers

You may want to replace the cable you're connecting to the TV with. I have seen this happen with one other camera, and it ended up being a bad cable.

Look it up on Google

The quickest way is to put the serial number into your search engine. To double check yourself, look thru the images until you see a picture of the camera you own.

Digital Cameras - Manuals - CASIO

support.casio.com > Support > Manuals

CasioIn order to use this service to download user's guides and operating instructions (manuals), you must agree to be bound by the following "Terms and Conditions.

Manuals - Support - CASIO

User Manual for Casio Watch Module - My G-Shock

[PDF]Operation Guide 5410 - Support - Casio

support.casio.com/en/manual/009/qw5410.pdf

CasioThis User's Guide uses numbers shown above to identify watch hands and ..... follow the instructions in this manual, especially the information under "Operating ...

User Manual for Casio Watch Module - My G-Shock

Sorry, we don't send e-mails. Only when you have the right tools and software to flash a camera from Casio, you could use firmware. You can't put in there firmware, when the camera is not 100% functional. Once the flashing of the new firmware starts, it can't be stopped, because it is writing new software that has no connection with the older software. And a part of the old with a part of the new software does not make one correct program. So NEVER try to solve a system error with a update. The system error must be repaired by a pro.

Remove the card and see if the pictures remain on the camera. If they do, then they are stored in camera memory. Make sure the memory lock on the card is in the proper position. Put the card back into your computer and delete the pictures. Then format the card, and try the card again. If the card is still locked, try a different memory card that has been formatted.

Good luck with this. Casio doesn't sell parts. Try Ebay.

To upload pictures to a PC or a MAC, you need to install the software that came with the camera. Only then the computer knows when the camera is connected and can start transferring pictures. On the CD are also the drivers if your system needs one. Most brands doe have the software on their site. For that goto the Support part of that site.

If there is no mechanical defect, the only thing I can think of is the battery does not have enough power. First recharge the battery then try again. Make sure nothing can block free movement of the lens while switching on or as long as the camera is switched on.

Page 163 of the online manual tells you how to do this. (My camera came with a manual written totally in Japanese. Once I found the online manual it only took about 1 minute for me to change the language to English.)

Delete, delete, delete, or get a new card.

Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa ( http://picasa.google.com ).