Storkcraft Baby Aspen - 4 Piece Nursery Set - Answered Questions & Fixed issues
I have a simplicity model
Take the crib back to the store you purchased it from. they will give you a refund or store credit to purchase a new one
How do I lower the mattress?
You have to unscrew the brackets from the front and back or sometimes they are on the sides of the crib and then lower the base. Then you will have to screw them back in
I need replacement parts for my crib.
any hardware store will have the parts you need; just take a sample bolt and, nut to them and, they will find them for you. these are not a special part exclusive only to your crib.
Where does the one large rail that supports the
Vancouver-based manufacturer Stork Craft is voluntarily recalling more than a million baby cribs in Canada and the United States over a potential suffocation hazard.
The cribs were manufactured in Canada, China and Indonesia between May 2000 and November 2008, the company said in a release.
About 494,000 of the cribs were sold in Canada and 535,000 in the U.S. in several retailers such as Wal-Mart, Kmart and J.C. Penny, as well as on several websites, including Amazon.com, Babiesrus.com, Costco.com and Walmart.com, the U.S.Consumer Product Safety Commission said in an advisory Tuesday.
Apparently in the garbage...but seriously,please call them. You may be entitled to free parts or replacement.
I am needing a instruction booklet to know how to
I would suggest checking cpsc.gov to check for possible recalls as this manufacturer has recalled over 500000 units recently due to a defect in the mattress support which can be fatal. To answer your question you can call the company at 877-274-0277 to order any parts or instrustions you may need for your model. Hope this helps and I'm not trying to worry or alarm you just giving you some info you may not already have. I am a father of 4 children and I like to stay as informed as possible.
Hiw do I get the back off a pottery barn pocket watch clock that has no screws.?
With tread you see dents round the back cover, where an adjustable tool with three pins that could be adjusted to size fits in. When there is no such sign there must be a small latch where a very thin knife goes under and I wish you best of luck, not to break the knife or hurt your self with it. The back should also suddenly break loose. It is not for every body to try attempt this. Wear glasses and gloves. Look for the very thin rubber seal that makes the watch more or less water resistant. It has to go back in place and keep it on when you can.
1/14/2024 9:41:01 AM •
Baby Gear
•
Answered
on Jan 14, 2024
•
57 views
I need instructions for Natart Rustico to make a crib and to make a bed All parts disassembled and mixed A parts list for each would be great also
I'm sorry, but I don't have access to specific assembly instructions or parts lists for the Natart Rustico crib and bed. However, I can provide you with some general guidance on assembling cribs and beds based on common practices. Please note that these instructions are general, and you should refer to the specific assembly manual that came with your Natart Rustico furniture for accurate details.
General Steps for Assembling a Crib:
- Sort and Identify Parts:
- Lay out all the disassembled parts and sort them according to their shapes and sizes. Identify key components, such as crib sides, mattress support, hardware, and any decorative elements.
- Follow the Manual:
- Refer to the assembly manual that came with your Natart Rustico crib for specific instructions. The manual typically includes step-by-step guidance and illustrations.
- Assemble the Frame:
- Start by assembling the main frame of the crib. Connect the crib sides to the headboard and footboard using the provided screws and bolts.
- Attach Mattress Support:
- Install the mattress support platform according to the manufacturer's instructions. This usually involves attaching it to designated points on the crib sides.
- Secure All Connections:
- Tighten all screws and bolts securely. Ensure that the crib is stable and does not wobble.
- Install Drop-Side Mechanism (if applicable):
- If the crib has a drop-side, follow the instructions carefully to install the mechanism securely.
General Steps for Assembling a Bed:
- Identify Parts:
- Lay out all the parts for the bed and identify the headboard, footboard, side rails, support slats, and any additional components.
- Follow the Manual:
- Use the assembly manual provided by Natart for specific instructions. Follow the steps outlined in the manual for your particular bed model.
- Assemble the Frame:
- Begin by connecting the headboard and footboard using the provided screws and bolts. Attach the side rails to complete the basic frame.
- Attach Support Slats:
- Install the support slats according to the manufacturer's instructions. The slats typically provide support for the mattress.
- Secure All Connections:
- Ensure that all screws and bolts are tightened securely. Check the stability of the bed frame.
- Attach Additional Components (if applicable):
- If there are additional components, such as decorative elements or storage features, attach them according to the instructions.
Parts List:
For a precise parts list, please refer to the assembly manual that came with your Natart Rustico crib and bed. The manual should include a detailed list of all components with corresponding part numbers.
If you do not have the assembly manual, you may contact Natart directly or check their official website for customer support. They should be able to provide you with a replacement manual or offer guidance on assembly.
Always follow safety guidelines when assembling furniture, and if you're unsure or uncomfortable with any step,
1/5/2024 9:29:20 PM •
Baby Gear
•
Answered
on Jan 05, 2024
•
49 views
Not finding what you are looking for?
