Lexmark X5470 All-In-One InkJet Printer - Page 7 - Answered Questions & Fixed issues

A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.

If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print/scan again.

Make sure the Lexmark OCR scan software is installed on your computer. The software allows you to scan your documents to PDF file. The software is only available on the installation disc that came with your Lexmark printer. If you don't have the disc, please contact Lexmark Technical Support Center for assistance.

A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.

If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print/scan again.

That sounds like an obvious hardware problem. Please contact Lexmark Technical Support Center for assistance.

A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.

If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print/scan again.

The #28 cartridge is not compatible with the Lexmark X5470 printer.Sorry

Try to rebrick you printer by pulling out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds. This will reset your printer.

If that doesn't help, try to plug your printer into a different known working power outlet.

If problem continues, please contact Lexmark Technical Support Center for additional assistance.

A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.

If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print again.

You may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/dbCiI6. Select your operating system, download and execute the file.

If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Please visit the Lexmark website to download and install the Lexmark X5470 Printer Driver on your computer. Use the Vista Driver in Windows 7:
- X5470 Drivers Windows Vista and Windows 7 32bit - X5470 Drivers Windows Vista and Windows 7 64bit

The printer is designed to align the cartridges whenever it is re-inserted in the cartridge carrier. You can press the Cancel button to disregard the alignment funtion. However, Lexmark does not recommend this action. This is to ensure proper printing on the paper.

It could be that one of the cartridges is not seated properly in the cartridge carrier. Try to re-seat the cartridges in the cartridge carrier.

It could be due to the refilled cartridge you are inserting in the printer. Refilled cartridges tend to degrade in print quality and cartridge performance.
You can try to clean the cartridge nozzles. On the printer operator panel, on Copy mode, press the Menu button > Tools > Maintenance > Clean Cartridges. Your printer will then print a test page forcing ink through the cartridge nozzles and clean them.
Try to print your document again to verify that the print quality has improved.
If that doesn't help, I would suggest you replace your refilled cartridges with new genuine Lexmark cartridges.

Leading cause of paper jams is debris/foreign objects that accidentally fell into the paper feed area. Please follow steps below to fix the problem:

1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again.

If problem continues, please contact Lexmark Technical Support Center for additional assistance.

Please contact Lexmark Technical Support Center for assistance.

Make sure you are inserting the correct cartridge versions in your Lexmark printer. The Lexmark X5470 uses the 32/34 black cartridge and 33/35 color cartridges.
If these are the cartridges you are inserting, please contact Lexmark Technical Support Center for additional assistance.

Leading cause of paper jams is debris/foreign objects that accidentally fell into the paper feed area. Please follow steps below to fix the problem:

1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again.

If problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark recognizes that some of our inkjet all-in-one customers may be experiencing issues with their print quality. We take our customer user experience very seriously, and we strive to ensure that each time a customer prints using a Lexmark device the page is crisp, clear and up to the highest standards.

However, if your device is displaying a 'printhead error' on the hardware and/or you are suddenly experiencing a print quality issue, please contact the Lexmark Technical Support Center at 1-800-539-6275 or point your browser to http://bit.ly/lFKDzs for online technical assistance.

Lexmark agents are prepared and able to help diagnose and resolve your issue. This may involve updating your printer firmware and/or replacing the printhead for your printer, at no charge to you, our customer. Installation is quick and easy for any customer to perform.

Your satisfaction with your Lexmark devices is our primary concern, and we are confident and committed to quickly correcting these issues.

(Statement above applies to US customers with 2009 products: S300, S400, S500, S600, Pro200, Pro700, Pro800 & Pro900 Series)

If you're printer is of older models, please contact Lexmark Technical Support Center for additional assistance.

A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.

If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print again.

You may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/dbCiI6. Select your operating system, download and execute the file.

If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.

If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list again, then try to print again.

You may also try to update your printer driver by visiting the Lexmark website at . Select your operating system, download and execute the file.

If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Try the steps below to fix the issue:

1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again.

Hi there

for the canner to work, you have to install the printer with the CD that came with the printer. The installation software will setup the scanner so that you can scan by pressing the scan button on the printeror from the Lexmark Productivity Suite on your computer.

If you do not have the original CD, you must download the software from www.lexmark.combut be sure to download the full printer install, else the scanner will be installed.