Call your service provider. They can see where the last triangulation of Cells occured and tell you (within 150') where it was when they last polled it. Cell phones regularly send out signals looking for a carrier (tower) and usually more than one will register the poll. They do that even when turned OFF.. until the battery dies.
First Option:Phone in the Other Sim and check the Phone Network Signal If Network Signal Problem not Solved SoSecend Option:Your Phone Network IC Fault So Please change Network ICAnd Network Signal Problem will Solvedif it is there isn't much you can do on this side of the network.Contact your phone company.
hi there are many ways to unlock the mobile we can use software ,cable ,codes etc.... among them codes are the best .nowadays there are many online sites found that provide the codes to unlock the mobile.you can get the codes from here theunlockarena here they ask the following details they are mobile model,country and the network which locks your mobile ,imei number of the mobile .finally they will send the codes to unlock the mobile.
For you to eliminate the issue, you have to update your phone. If you have noticed that there are bugs in the Palm Treo 750 operating system, then you may want to update the phone. Palm releases updates for its phones and devices, but you can only get these updates with some providers. If your Palm Treo 700p is provided by Verizon, then you can download a software update. The updating software fully automates your upgrade, so little user interaction is required.
Instructions:
1.Connect your Palm Treo 750 via USB to your computer. Press the "HotSync" button before you update your software. This keeps all your files and contacts up-to-date after the update.
2.Download the Palm Treo 750 update software. (See Resources.)
3.Double-click the ZIP archive. Then double-click the setup file extracted from the archive.
4.Click "Next" throughout the update process. This will take between 10 and 45 minutes, depending on your existing software version.
5.Disconnect your phone when prompted. Dial "*228" (without quotes) and press "2."
This could be due to a faulty charger, or a software problem. Check whether the phone gives the same battery life after charging it for 4-5 hours. If so then it's probably a software problem and you can ignore it. If that doesn't work then try replacing your charger or battery.
