20 Most Recent
Questions & Answers
what in the world is that, use the service tag model number
and stated OS version running.
the HP manual tells you all beeps codes, HP.com
read that yet?> PDF book on service? free?
that is a mobo #
is it too much trouble to say out of WHAT?
you need to go in to BIOS
and set the boot device first.
and order. and not have CD installed if enabled.
the HDD must be bootable, is it?
if not do a fresh install of your unstated OS.
on Mar 12, 2017
HP P4B-MX beep
HP P4B-MX is Award Bios
Award and Phoenix BIOS:
1 short beep: Normal
2 short beeps: CMOS error
1 long and 1 short beep: DRAM error
1 long and 2 short beeps: Video card error
1 long and 3 short beeps: Keyboard error, or video card error
1 long and 9 short beeps: ROM error
Long continuous beeps: DRAM not installed correctly, bad memory, or incompatable
Short continuous beeps: Bad power supply
on Oct 23, 2014
1 short beep 1 long beep on hp pavilion elite m9458f pc
that means there is a memory problem,if you recently installed something inside of the case or tried to clean it ,that you might have displaced,or jared the memory loose,try to pull each 1 out seperatly and clean the contacts with 90% isopropyle alcohol and a lint free rag,let dry for a min. then reinstall into same slot,when you have done that,try to boot,if it still doesnt boot then you have bad ram.
on Aug 01, 2012
5 long beeps laptop
with most brands , hp-dell-acer-ect, slow beeps is ddr memery problem...if the beeps are at narmal tone,(and thers no vidio).its probley your internal vidio card..
on Feb 25, 2012
When i put the power
Base from the description of your problem its really not an issue with your monitor its with the motherboard or the video card provided that you have a video card connected to it or you're using the built in video on your motherboard.
By the way when you power it on do you hear any beep sound and if so how many beep sound that will help us check what is the real cause of the problem.
So first thing that you can try to do here is to clean your RAM , so take it out from your moterboard and use a eraser to clean the golden teeth of the RAM and then put it back in and check if that will make it working again, also double check all the connections on your motherboard to make sure nothing is lose.
After doing those things and still same issue this is really a issue now with your motherboard and may need a replacement.
on Sep 11, 2011
I wanna install sound driver
First of all the drivers for your sound card is free!
Download it in the HP home page, support, downloads, and select the OS you're using.
Hope that helps you out.
Thanks for using FixYa!
on Jul 30, 2011
HP(SIS)MOTHER BOARD SOUND DRIVER INSTALLER?
if you are having problems
with your sound
if your computer came with
a motherboard disc the sound drivers could be on it
click start control panel
administrive tools computer management device manager scroll to sound,video and
game controllers you might see a yellow question mark? Right click to reinstall
drivers or uninstall
click start control panel
sounds and audio,volume,advanced,speakers make sure you have selected the
also audio you will find 3 drop down lists make sure you have the correct
click start control panel
sounds and audio devices you can adjust the volume there also select speaker
volume you can change your settings there you can also tick in the box place
icon in taskbar
if his does not fix the
have you tried this control panel sounds and
audio,volume,advanced,speakers select the appropriate speakers from the drop
down list or navigate to the device manager scroll to system devices + to
expand,system speaker right click properties then select use this device
(enable) also you might check
the speakers plug/outlet is
usually at the back of the computer you will have to open up the computer
to check the lead attached to the rear of the input plug make sure the
connection is good
try cleaning your computer of dust using a fine air blower from a
compressor making VERY sure that there is no MOISTURE in the air line
specifically around the sound card and the CPU central processing unit dust
causes static to build up in a computer
make sure you have an earth
******** before touching any parts inside your computer
hope this helps
on May 22, 2011
I need to buy a
If you are trying to replace a non-working motherboard, try E-Bay. Search by the computer model number. You also will find the board with version number on the old board.
on May 10, 2011
How to enable vga mode
How to boot into safe mode or VGA mode Sometimes while changing video cards you can get Windows into such a bad state that it refuses to boot. If something is wrong with your display drivers Windows will often be unable to start up properly. But in order to fix the problem you need to get into Windows so you can re-install or fix your display drivers. So Windows won't run but you need to use Windows to try to fix the problem. Fortunately Windows can run in "safe mode" which allows it to boot while not using your installed display drivers. Unless Windows is severely damaged, it should be able to boot in safe mode.
To get into safe mode with Windows 98 and ME press and hold the Ctrl key immediately after you turn on your computer. In other versions of Windows you need to press the F8 key. On some computers you can press and hold F8 and on others you have to press F8 at the right time which is usually just after the initial BIOS screen (see fiddling with your BIOS) has been displayed. If you can
on Apr 12, 2011
How would i know the
Try downloading either of the following two FREE utility programs. They both
tell you many specifics about your entire system, and are free indefinitely. I like 'Belarc' better, because it seems to provide more info. It gives you this info in a web page format, so many items you can click on and go to their website (as in devices, Windows Updates, etc.). The 2nd one is made by the same people who make CCleaner, 'Piriform'--it's called 'Speccy'--it runs MUCH quicker, but not as much info is given. Download both, if you want--but I think Belarc will help you with your mobo model #. Usually this particular info is given in the upper-right hand side of the page on Belarc.
>>CLICK HERE TO GO TO THE DOWNLOAD PAGE FOR BELARC<<
>>CLICK HERE TO GO TO THE DOWNLOAD PAGE FOR SPECCY<<
Hope this helps!
on Mar 11, 2011
Hp compag pentium 4, intel
Now you can download easily one after one. After downloadall the driver, unzip the fie with winrar or zip.
Download the winrar free,
Copy the link and paste on address bar.
Now right click on every downloaded file and select EXTRACRTTO THE FILE FOR......, then create a new folder with the driver file, you caninstall easily.
Hope this helps.
There is an rate option "Was this helpful?" Yes or No.
If you are helped you can rate ,that is your choice.
on Jan 17, 2011
HP L1908 w mother board
Hi. go to your motherboards manufacturer website for support. if not,,
register at www.driverguide.com
download your drivers. dont forget to select the correct operating system you are using. if Win XP 32 bit or 64 bit....
on Nov 11, 2010
I have no sound on
Is this the HP Pavilion 521n? Did you run the Win7 Compatibility test before upgrading and search for the latest drivers? Did that compatibility test show any problems with of your hardware. HP doesn't have the drivers. The onboard audio chipset is (Realtek or Intel) AC97 Audio.
I know for my WinXP to Win7 upgrade, I was able to find the appropriate drivers from the Device Manager. (Start > Control Panel > Hardware and Sound > Device Manager.) Then I needed to run Windows Update (Start > All Programs > Windows Update. Look for optional updates and check for new ones) to install the driver (since I didn't let Windows Update automatically install.) You can get drivers to install automatically by changing the settings. Start > type change device installation settings in the search box. Click on Change device installation settings and set this to automatic. Then save the changes. However, my on-board sound is a SoundMax driver.
When I checked the Realtek site for downloads, I got a loop to "object moved" http://www.realtek.com/Downloads/downloadsCheck.aspx?Langid=1&PNid=14&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=false
may work; this is a Realtek driver for Vista or Win7.
If you have added an audio card, you need to check with the manufacturer.
I hope this helps.
on Sep 18, 2010
Not finding what you are looking for?