20 Most Recent Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum - Page 9 Questions & Answers

The roller is probably propelled by a belt that needs to be replaced with a new tighter one.

https://www.mumsnet.com/Talk/housekeeping/604039-washing-machine-sounds-like-there-is-something-metal-loose-insidehttps://removeandreplace.com/2015/07/27/washing-machine-making-noise-during-the-spin-cycle-how-to-fix/https://www.espares.co.uk/advice/careandmaintenance/how-to-diagnose-drum-problems-in-a-washing-machinehttps://www.appliancesonline.com.au/academy/laundry/6-common-washing-machine-problems-and-how-to-solve-them/

Go here and start searching https://www.bissell.com/support/user-guides Although I could not find anything under power flex ... Sp you may need to read the model number off the mfg plate on the vacuum ... and search on that

find a video on how to disassemble this on youtube and you may learn a little about how it works, how to take it apart, and most likely clean anything that causes this problem and put it back together.

that would be the first item to check.

notify bissell or online search using make and model for part

your choice,but I would look at total cost.

Make sure that everything is connected correctly all seals good.was it used for a long period of time cuz with mine I burnt it out for using it 4 hours straight and it only been used twice before apparently the bezel needs to rest from time to time

Make sure all the tanks are seated properly and everything is clamped down. I found that if everything isn't sealed it won't suck. Also be sure the red filter is clear of debris. You can hear the difference when everything is clamped and sealed. Hope this helps.

Make sure all the tanks are seated properly and all clamps are securely clamped. I found that if it's not all sealed tight it won't suck. Also make sure the red filter is clear debris. You can hear the difference when it's all tightly sealed. Hope this works for you.

https://secure.img1-fg.wfcdn.com/docresources/4678/17/170911.pdf

Sounds like you might have got the wrong belt, it should be snug but not super tight. Take belt off and see if the motor spins freely, if so I would try another belt.

thats normal