20 Most Recent Arris SURFboard SBG900 Wireless Router (DHSBG900) - Page 4 Questions & Answers

http://portforward.com/

http://www.fixya.com/support/r11153882-general_routers_reseting

To Access the Home Screen

1. Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.1.254 into the address box. NOTE: By default the LAN IP address is 192.168.1.254. If the default address has been changed, enter the custom address in the address box.
2. At the login prompt, a. Enter Admin for User name. b. Click the OK button. The Home Wireless Router page appears.

You can either disable your NAT (not recommended) or you can port forward. Here is a link that describes the port forward process.

http://www.portforward.com/english/routers/port_forwarding/Motorola/SBG900/Xbox_Live_360.htm

saxtmich2000

does it happen at the same time daily or is it periodically ?this might be because of an overload of users using your network at the one time or it might be a fault in your wireless router how old is it ?if you call your ISP internet service supplier during the outage time and get them to test the connection you will need to have your computer turned on they will be able to tell you where the fault lieshope this helps you

This is very simple. Go to http://192.168.0.1 and login using "admin" for the username and "motorola" for the password (both without quotation marks). From there you'll see a column of buttons on the left-- click on "wireless". In that new page you'll see a row above the main content with 4 tabs-- click "security". Now you'll see an area that says "security mode". I would recommend using WPA because it is the most secure. You'll choose what you want the password to be in the field that says "Passphrase", and then press "Apply". You'll notice you aren't connected to the internet anymore (if using wifi) because you'll need to reconnect and put the new password in. That should do it, but let me know if you have anymore questions!

Starting the SBG900 Setup Program

1. On a computer wired to the SBG900 over Ethernet or USB, open a Web browser. Do not attempt to configure
the SBG900 over a wireless connection.

2. In the Address or Location field, type http://192.168.100.1 or http://192.168.0.1 and press ENTER to display
the Log In window:

3. In the User ID field, type the User Name; the default is "admin" (this field is case sensitive).
4. In the Password field, type the Password; the default is "motorola" (this field is case sensitive).
5. Click Log In to display the SBG900 user configuration and status windows:


6. Then click on "Gateway" located at the left corner.
7. Then click on "Port Triggers".
8. Then choose "custom"



And from there:

ADD NEW SPECIAL
APPLICATION

Name Enter the unique name for the port trigger. This is typically the protocol.
Enable Select this box to enable the custom port trigger.
Protocol Sets the transport protocol for the port trigger - TCP or UDP.
Port Range Sets the port range for the port trigger. Type the start of the range in the
(From:To) left field and the end in the right field.

Session Chaining Enable session chaining if the application needs to open one or more ports in
different ranges to operate properly. The options are Disable, TCP, TCP/UDP.

Session Interval Sets the session interval for the application:
• If the port triggers detect traffic on the Port Range within the Session
Interval, it is considered to be related to the initial session.

• If the port triggers detect traffic on the Port Range after the Session Interval
expires, it is considered to be a new and unique session.

Address Replace Sets the address replacement method for the application.
Multi Host Select if appropriate for the application.
Add Click to add the port trigger to the PORT TRIGGERS TABLE.
PORT TRIGGERS TABLE Lists all port triggers you defined and their parameters.

Hope it help you....

Try to access 192.168.0.1 once again. Try to use "admin" for the username and "motorola" for the password. If "motorola" doesn't work, try "password".

You have to configure port forwarding in your router. Do you know what ports are used by "Buddy for CLZ Barry" and "First Class" (it probably uses port 21)? After you figure out the port numbers, follow the port forwarding steps documented in the router manual. Here's the link to the router manual:
http://help.cableone.net/HSD/Modem/PDF/SBG900_User_Guide.pdf#page=51

Contact your internet service provider to activate your wireless security on router.

Do you get an error that says something such as "Unable to validate identity"? You can definitely fix this issue by logging into the modem and changing the security to WEP. If not WEP you can try no security. I know that no security will work but its trial and error to find out which security type will work with the Dell wireless.

I had the same problem and i think i remember how to solve it. When you are ready to enter the pin # (the one that has to be 8 digit long0, ignore it and instead click in the bottom part of the window where it say something like 'enter key phrase/password instead' and then it will ask you to enter one. The password is listed in the label on the bottom of the router. It is the long one under 'WPA-PSK." I hope that helps.

No, the AT&T service must be paired to the service by AT&T and therefore you will need to obtain a DSL modem directly from them. They don't usually charge for the DSL modem and offer the wireless service with their DSL service free of charge.

http://broadband.motorola.com/noflash/customer_docs/user_guides/507755-001.pdf Please go through this article .In this article Basic configuration>Setting the firewall policy>firewall policy advance page.