Samson C01U Consumer Microphone - Answered Questions & Fixed issues


Sorry this isn't a solution but just letting you know I'm having the same trouble, the funny thing is mine was working a couple of months back and now its not, it's driving me crazy.

Samson C01U... | Answered on Jul 04, 2016 | 615 views


I found three posts to assist you.

1. http://samsontech.com/products
/productFAQs.cfm?prodID=1810&brandID=2

2. http://download.cnet.com/Samson-C01U/3000-18493_4-84344.html

3. http://www.samsontech.com/usb_mics/driver_update/

Samson C01U... | Answered on Jul 04, 2016 | 947 views


1. Did you select Left channel only in Audacity for the track you're recording?
2. Maybe it's a defective mic. Try it on another computer/software/USB cable/USB port and if it still doesn't work get Samson to replace it.

Samson C01U... | Answered on Aug 03, 2014 | 260 views


Sounds like a defective mic. Test it on another computer, with another USB cable, and if it still doesn't work, call customer service and they'll send a replacement.

Samson C01U... | Answered on Aug 03, 2014 | 158 views


i found the problem i also fixed the ******* problem in windows 7 theway to fix is that go to recording devices in the volume mixer (i mean in the taskbar the speaker icon right click it recording devices and it will show your mic if ya hav been pluged it) the after going to recording devices then double click the mic u are using then an windows will appear . go to enahcement tab untick "dc offset cancellation". thats it

Samson C01U... | Answered on Aug 03, 2014 | 751 views


1. Does one of your friends or family have a computer with a cd drive? And a USB jump drive? Have them move the files from the cd to the USB stick and insert the USB stick into the computer and install from there.
2. Buy an external cd drive from Best Buy or Frys.

Samson C01U... | Answered on Dec 22, 2012 | 135 views


The thing is that the Samson C01U was not designed for live applications. Your solution, if you like delayed sound, is to use Virtual Audio Cable. Otherwise, I would get either a Samson GTrack, or invest in a cheap but functional mixer with a good mic. If you want to record however, you go into your audio recording settings and select the C01U as the recording mic. If you record and hear little sound, go into sound manager... Click on properties and select on Samson C01U. A one channel volume control will pop out. change the volume and record. BTW, a good audio program is Audacity... It's free. I hope that I have helped you...

Samson C01U... | Answered on Aug 03, 2014 | 371 views


this problem need to be fixed, your microphone need to unlock it, and see if there is any piece in a wrong position, try to isolate each piece, without cutting any wires, it seems like a hard process but its not that hard, and remember you should do this unless you are sure that there is no shallow problem like the wire that is plugged onto the computer, see if its appropriately inserted id not do the process yourself.

Samson C01U... | Answered on Mar 30, 2011 | 341 views


hmm that is strange, are you seleting the mic as an input in the source for audio? the software works on win 7. have you tried other mics in the input on your sound card?

Samson C01U... | Answered on Mar 20, 2011 | 468 views


1. Please be sure that you have met the system requirements Creator 2011

2. Defragment your hard drive. This will allow larger files that you have created to be more easily read by the program and allow more efficient writing of data for video and audio capture to your hard drive. To do this:

* Go to Start -> All Programs -> Accessories -> System Tools -> Disk Defragmenter.
* In the Disk Defragmenter window, select the drive (a.k.a. volume) you wish to defragment.
* Note the Free Space column. If you have less than 10% free space available you may run into issues defragmenting. Additionally, the drive is too full to capture any new media to it. Doing so may result in the hard drive crashing and data loss. Unless more free space can be safely made, it is recommended that you purchase an additional hard drive just for your multi-media projects.
* Click the Defragment button.

NOTE: If frequently using your computer for recording and editing audio and video, defragmenting your hard drive on regular basis (about once a month) is recommended.

3. Contact your video card manufacturer for the latest video card drivers. If you purchased your computer as a complete system (like Dell or HP), then go to the manufacturer's website for the latest drivers.

If you purchased your video card separately, then you will need to find out your make and model and go to the video card manufacturer's website to download.
* Windows XP: Go to My Computer and choose Properties.
* Windows 7 and Vista: Go to Start -> Control Panel -> System and Maintenance -> Device Manager.
* Click on the Hardware tab.
* Select Device Manager
* Double-click Display Adapters. You're video card make and model is displayed.
* To find out the driver details (such as version), right click on the make and model under Display adapter, and select Properties.


4. If running Easy Media Creator for the first time, or it's been a while since you used it, RoxWatch will require a few minutes to index your hard drive for new audio, video, or photo files. This allows Media Manager to create a convenient list of all the files you can create projects with in a single window. Once the indexing is completed, Easy Media Creator will launch faster only looking for newer files. However, if you wish to disable this function, do the following:

* Windows XP: Go to Start -> Run -> and then type "msconfig" and click OK.
Windows 7 and Vista: Click on Start -> type "msconfig" in the Search field and press Enter on your keyboard.)
* In the System Configuration Utility window, select the Startup tab.
* Locate RoxWatchTray10 (or whichever version you are using) under the Startup Item column and uncheck it.
* Click Apply and then OK.
* Reboot your machine.
* On reboot, you will receive a dialog from the System Configuration Utility. Check the box at the bottom of the window requesting not to see the dialog again and click OK.
*Creator.

Samson C01U... | Answered on Mar 09, 2011 | 90 views


Sounds like mic is defective, I'd ask for a replacement.

Samson C01U... | Answered on Feb 26, 2011 | 235 views


hi,

Your problem is there are 3 reasons
The first connection of your USB mic problems
The second USB port of your computer problems
three windows system problem or virus

The first thing you do a test using a different computer and see the results. If the problem still the same this means that your microphone usb connector problem

Second, if your microphone is successful on the computer this means you need to perform tests on the USB port or your asus laptop operating system, most likely the problem is the USB port or an operating system.

regards

Samson C01U... | Answered on Mar 14, 2011 | 270 views


If you can't locate one via a Samson dealer (try Amazon) the next best thing would be to go to a musical instrument store and buy a universal (butterfly) mic clip. These have one of 2 standard screw threads on the bottom (you can get an adapter for the other size if it doesn't come with both) and will fit most mic stands. Because of the butterfly design they will take almost all microphones except the fattest ones - which need a soft rubber clip designed for 'radio mics'

Samson C01U... | Answered on Jan 30, 2011 | 236 views


Some users have reported problems with this microphone not working properly with Windows Vista operating system but it is fine with XP and Windows 7. Some MAC & Linux users have also encountered installation problems.
All condenser microphones require a power source to make them work. In the case of USB mics they take their operating power from the computers USB port. If you have a lot of other USB devices connected then there may not be enough power available to run them all at the same time. Disconnect any devices that you do not need.
First step would be to make sure that you connect to a main USB port (not a separate hub). If you are using a desktop or tower computer use the USB ports on the rear of the computer, which are mounted directly on the motherboard. Front panel USB ports are normally on a hub and may therefore prove unreliable with some devices..
Next try to diagnose the problem by process of systematic elimination
  1. Test your sound-card - does it work okay with other sound sources such as a microphone plugged into the normal microphone input (red socket) on the sound-card or on your front panel.
  2. Do you have another USB sound source that you can plug in to make sure that your computer will accept sound from that route?
  3. Now check the microphone for faults. Is the LED on the microphone coming on to indicate it is getting power?
  4. If no the microphone itself, or the cable, may be faulty. Try plugging it in to a different computer, games console, stereo or audio device with a USB input to see if it will work there (note not all audio devices will have sufficient power on the USB socket so this test may not be conclusive)
  5. Is the computer operating system actually recognising the presence of the microphone in the first place?
  6. Does a little balloon pop up to say a device has been plugged in - and does it correctly identify what that device is by telling you it's name?
  7. If the system recognises the device but doesn't correctly identify then you may need to install a driver for the microphone.
  8. From the windows start menu go to CONTROL PANEL.
  9. Click on SYSTEM, then HARDWARE, followed by DEVICE MANAGER
  10. Scroll down to SOUND VIDEO & GAME CONTROLLERS. Does the microphone appear here? If yes does it have a little yellow asterisk next to it? If so it is a driver issue.
  11. Sometimes a USB driver issue can be resolved by uninstalling the USB controllers and reinstalling them. Scroll down the list of devices in DEVICE MANAGER until you get to UNIVERSAL SERIAL BUS CONTROLLERS. Systematically uninstall every device listed here. To do this RIGHT CLICK on each device and then click UNINSTALL. Then on the TOOL BAR click CHECK FOR SYSTEM CHANGES. this will reinstall all USB devices and controllers.
  12. If that does not solve the USB problem go to your computer manufacturers website and download the latest USB drivers for your machine.
  13. Assuming you have overcome the USB issue (or if this was not the problem anyway) you now need to check that the microphone is selected as your default audio device.
  14. To do this go back to CONTROL PANEL, followed by SOUND & AUDIO DEVICES
  15. Click on AUDIO and, under the SOUND RECORDING tab select your microphone from the drop down list.
  16. Then click the VOLUME button which will open a window called RECORDING CONTROL
  17. Make sure there is a tick (check mark) against microphone and that the slider is up at the top of the scale.
  18. If everything is okay up to this point the problem may well lie in the settings for the audio / recording program that you are using. Most programs have some sort of wizard for testing audio settings, which you will need to work through.

Samson C01U... | Answered on Jun 05, 2012 | 855 views


Send them an email. Same happened to me and they will supply you with a new one, cost about £5

Head over to here

Samson C01U... | Answered on Jan 25, 2011 | 831 views


Since it's probably going through some form of electronics I would think that is where your volume control would be. Name it.

Samson C01U... | Answered on Jan 21, 2011 | 246 views


Did you try opening the sound properties page in the control panel...look for the recording tab in sound properties..here you will find sliders for the inputs on the sound card(as for recording)..you may need to set these up also to make everything work properly...there also should be a sound mixer built in to windowsthat you can access by clicking the speaker icon on lower right side of screen(if you have icons enabled)..right click this to open and when you get to the mixer there should be a tab at the top for advanced controls..here you will find the recording controls..make sure the input is turned up and make sure the input in not muted..there should be a box for mute and it should not be check marked

Samson C01U... | Answered on Jan 21, 2011 | 807 views


Installing SoftPre usually fixes the problem. http://www.samsontech.com/main/misc.cfm?pageID=45 Good Luck, Cody J.

Samson C01U... | Answered on Dec 20, 2010 | 299 views


Install the Samson SoftPre and you should be set. http://www.samsontech.com/main/misc.cfm?pageID=45 Good Luck, Cody J.

Samson C01U... | Answered on Dec 17, 2010 | 150 views


The delay is due to the time it takes to digitize the audio and pass the data through your computer to the audio board.

Depending on your system and software, you MAY have a setting for ECHO which loops the sidetone directely to your headphones so the delay isn't present/

Samson C01U... | Answered on Sep 15, 2010 | 189 views

Not finding what you are looking for?
Samson C01U Consumer Microphone Logo

65 questions posted

Ask a Question

Usually answered in minutes!

Top Samson Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76466 Answers

ray gallant

Level 3 Expert

71004 Answers

Are you a Samson Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...