20 Most Recent Danby DAC9003D Air Conditioner Questions & Answers


Hi,
Here is a tip that gives a further explanation of that E-1 code. The causes of the E-1 code can be varied depending or the brand of your air conditioner.

Read through this tip... it will help you understand what is happening with your window air conditioning unit and give you some things to try to help you get your problem resolved.

E-1 Code on Window Air Conditioning Units
http://www.fixya.com/support/r5620902-e_1_code_window_air_conditioning_units

heatman101

Danby DAC9003D... | Answered on Aug 19, 2010


Hi,
There can be a couple of things that could be happening...
The first and easiest thing is to check the air filter. Make sure that it is clean... clean it or replace it. Next check the air vents to make sure that they are open and giving you good air flow...
Also check to make sure that you are not icing up on the indoor coil... ice will tell you that you are low on refrigerant. You also could be low and not be icing over, but you would need to have gauges on the unit to check that.
Finally check and clean the outdoor coil...this also can give you problems if the heat is not being removed from the outdoor unit efficiently...
You may also have a unit that is sized in such a way that it hits the balance point at about 85...that means that your heat gain is equal to the capacity of the unit...I often try to size them for about that here in Northern PA. because wqhen seldom get hotter then that and the unit then is much more effective at removeing humidity at lower temperatures...

You can also check out the tips that I have wrote about Air conditioning2_bing.gif trouble shooting and maintenance...

Here is one about cleaning the condenser coil and at the bottom of that one are links to others..

Condenser Coil Cleaning Condenser Coil Cleaner

http://www.fixya.com/support/r3850183-condenser_coil_cleaning_condenser_coil

heatman101

Danby DAC9003D... | Answered on Jul 12, 2010


CHECK BREAKER AT MAIN BOX , SHUT OFF BREAKER ALL THE WAY OFF AND BACK ON. IF YOU DO NOT HAVE BLOWER WHEN YOU TURN FAN SWITCH TO ON THEN YOU STIIL HAVE NO POWER TO UNIT . GO TO OUT SIDE UNIT ON GROUND AND PULL OUT DISCONNECT FUSES AND TEST THEM OUT OF FUSE HOLDER LIKE AUTO FUSES. IF UNIT IS ON ROOF SHOULD HAVE FUSES UP ON ROOF IN 6  X4 GRAY BOX. SHUT OFF BREAKER FIRST BEFORE FUSE TEST. IF FUSES OK AND BREAKER OK THAN YOU MIGHT HAVE BLOWN TRANSFORMER.

Danby DAC9003D... | Answered on Apr 21, 2010


ACs are designed to cool down to about 68^F, don't think it has a chance of doing what you want w/o re-engineering the system which is not really an option.

Danby DAC9003D... | Answered on Sep 26, 2009


If it's the cord, It should have a plug on it unless someone cut it off.which some people do to hardwire into an outlet. There should be three wires inside an outer cover of rubber. Black, white ,and green. If so, that should be the power cord. You may have to install a new three pronged plug. Good Luck.

Danby DAC9003D... | Answered on Aug 26, 2009


CLEAN YOUR FILTER THEN UNPLUG YOUR UNIT AND REPLUG IT AFTER ABOUT A MINUTE

Danby DAC9003D... | Answered on Apr 28, 2009


what hoses


we are a authorized servicer for dandy and can get you any part you need that is available from the manufacture however air conditioners do not have hoses . if you need an external drain
hose you can get those at home depot or lowes

ALL BRANDS APPLIANCE REPAIR
5008 W. LINEBAUGH AVE # 8
TAMPA FL 33624
OFFICE 813-908-2002
FAX # 813-908-5559
EMAIL [email protected]

Danby DAC9003D... | Answered on Jul 11, 2008


Sounds like the control electronics are faulty. Replace control unit.

Danby DAC9003D... | Answered on Jun 23, 2008


There may be a starting delay built in, which will not allow restarting within 5 or 10 minutes. Other than that, the control unit may be faulty & require replacement.

Danby DAC9003D... | Answered on Jul 15, 2007


The 5000 is designed to evaporate all condensation produced. When on extremely hot and humid days if machine produces excess moisture it is normal for machine to drip from back. No, do not drill a hole. Your unit is ok.

Danby Heating &... | Answered on Jul 19, 2019


Google (danby)(vkk009)(manual) without parens.

Danby Heating &... | Answered on Jul 12, 2019


Possibly because the sensor is still wet. Unplug it for a bit.

Danby Heating &... | Answered on Jul 11, 2019

Not finding what you are looking for?
Danby DAC9003D Air Conditioner Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Danby Heating & Cooling Experts

Dennis Boxerman

Level 3 Expert

1300 Answers

mintvl

Level 1 Expert

13 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you a Danby Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Danby Heating & Cooling

  • Danby Heating & Cooling

Most Popular Question

code flasing

  • Heating & Cooling
Loading...