Top 20 Kyocera Mita TASKalfa 180 Black Toner Cartridge Genuine Questions & Answers

TYPE THE CODE 1087 TWICE THAT WILL GET YOU TO SERVICE MENUE COPY THAT 130 THEN START YOU ARE RUNING DEVELOPER NOW. WAIT TILL IT FINISH RUNING. PRESS START. YOU COMPLET IT NOW . IHOPE THAT WORK

press1087 twice the scree will chancge to service mode type 130 then start it will run developer checking .I hope thats help

Hi, for what model is the problem?

THAT IS A FUSER PROBLEM - FIRST OPEN FRONT COVER THEN PRESS 1087 TWICE AND TYPE 163 THEN START . IF THAT DOES NOT WORK YOU WILL HAVE TO GET THE FUSER UNIT OUT AND CHECK UPPER AND LOWER FUSE .

c6000

If you just had a power failure, it means the fuser has to be reset in service mode.

try

All new copier/printer has safety pacageging SCREW /TAPES to prevent damage in traveling/shipping w/ it your Kyocera taskalfa 180 won't print, look for it and remove it all usually it is color orange 1 of them located at Optics unit .

C3100 is a scanner carriage problem... The error code indicates that the "home signal" is not reaching the main board in the required time;if its new machine check the scanner lock removed or not.other wise open platen glass and clean all optics,,if its not working check the main board,&connector cables,,,,

Login wid ur username and existing password..then go to settings and click d change password link..type ur New password

Add the toner thats empty.

Don't attempt

just open platen glas and clean the mirror,,,then clean tha laser unit also,,,then it will work,,,

its code for fusing unit...you can reaset this one ,,go to service mode then 163

The manual says you have a paper jam in Multi-Purpose Tray. It is on page 7-10

check registration black switch arm, spring has come off.

my dear your problem is grid wire you first clean grid

Check that the registration switch lever does not jam inside the guide by pushing on it. You may have to modify the grooves that the lever shaft rides in to allow it to swing freely.

Question edited to better English and spelling. Question moved to Kyocera MITA. https://www.google.com/search?q=Kyocera+Mita%2C+replaced+toner+but+still+says+replace+toner ..

https://www.manualslib.com/manual/359935/Kyocera-Km-2530.html?page=1#manual https://www.manualslib.com/manual/359935/Kyocera-Km-2530.html?page=10#manual https://www.manualslib.com/manual/359935/Kyocera-Km-2530.html?page=11#manual