20 Most Recent
Danby 22 in. DDW396 Free-standing Dishwasher - Page 9 Questions & Answers
Error code #4 on ddw1899wp danby dishwasher
see this possibles causes:you must read your instruction manual and go to the section troubleshooting for fix it the error codes. If you do not have go www.fitness.manualsonline.com or www. retrevo.comGod bless you
5/26/2012 1:45:52 AM •
Danby...
•
Answered
on May 26, 2012
Hi. I have a Danby
Hi
Please check that the dishwasher is properly connected with electrical
power and door is closed and latched. Also check that the unit is leveled
properly. If still the issue is not resolved then I'll suggest you to contact
the dealer and use the warranty. Hope this helps...please post back for further
assistance.
Daniel
5/17/2011 8:32:02 PM •
Danby...
•
Answered
on May 17, 2011
My dishwasher is not emptying fully, there is a
Hi.
If there is no blockage, then the problem is the water level device.
Water level is sensed by the float switch. Most models use the float sensor only to detect overfill. In that case water level is sensed through the pressure switch located on the drain well.
Replace either one.
7/8/2010 3:36:24 PM •
Danby...
•
Answered
on Jul 08, 2010
I just ran my dishwasher.
Hi
Thanks for using FixYa. Error E1
means water pressure problem / water not running properly. Check connections;
check that water is turned on. Please do accept the solution if the issue is resolved or else revert
for further assistance.
Thanks
Rylee
3/7/2010 5:43:20 PM •
Danby...
•
Answered
on Mar 07, 2010
Not finding what you are looking for?