Top 20 Sylvania 6432TE 32" TV Questions & Answers


Try a reset to this set, and check. If it do not help you, check and replace its main system control memory IC. It is faulty. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Type in this key phrase " my service table today " in the search box at the top right of the display window of the home page, to get gathered some pages which has the details of practical experiences to the author of that site.

Sylvania 6432TE... | 142 views | 1 helpful votes


check Ebay for a replacement ORIGINAL remote control

Sylvania 6432TE... | 60 views | 0 helpful votes


If you get a picture on regular TV then the tube is fine. If you get audio on game mode try changing the red or white plug to the yellow plug and see if your picture is there. If so you have a bad yellow cord. If not then the solder connection on the board inside TV is bad. If you also have no audio in game mode then the whole board is bad.

Sylvania 6432TE... | 58 views | 0 helpful votes


No. To select the inputs, you must have a remote control.

Sylvania 6432TE... | 607 views | 0 helpful votes


Out of focus picture is your TVs problem I assumes. Seek tech support. Picture tube base socket may need replacement.

Sylvania 6432TE... | 48 views | 0 helpful votes


Hello
Three digit universal remote codes for Sylvania TV are:
004/008/009/062/068/069/074/075/076/077/133/161&163
Four digit codes are:
0062/0004/0009/0135/0189/0183/0227/0456/0008/0068/0075/0141&0161
OK.

Sylvania 6432TE... | 461 views | 4 helpful votes


I am sorry, you will need the original remote or a remote that is similar.

You can check out 1800remotes.com and see if they chan help.

Thanks
asnowman

Sylvania 6432TE... | 333 views | 0 helpful votes


replace the H.O.T horiz. Driver Transistor.

comen problem with this set.

Sylvania 6432TE... | 329 views | 0 helpful votes


The code for the Sylvania 6432te 32" TV with the "Innovage products- Jumbo universal remote" is 189. you push and hold down the code search button, when the light starts to flash, hit tv, then the number "189". Finally, push the power button off on the remote control. if the tv turns off, then it worked. :)

Sylvania 6432TE... | 292 views | 1 helpful votes


This problem is caused by your TV's V-chip setting.

To fix the problem:

Push the "Menu" button (on either the remote or the TV's fromt panel).
Use the "Channel Down" button to go to "V-CHIP SETUP"
Use the "Volume Up" button to select it.
In the V-chip setup screen, the rating that is selected by the user as viewable will allow that rating and only lower ratings to be viewed on that TV. (If TV-G) is selected, then any programs rated higher than TV-G will be blocked.

So, the easistway to get rid of any blocking is to set the rating to TV-MA (mature), and then any and all programs will be viewable on that set. Select "TV-MA" by hitting the "Volume Up" button after you have scrolled down to that rating with the "Channel Down" button.

Then hit "Menu" to exit out of the settings and saave your changes.

Sylvania 6432TE... | 15,194 views | 141 helpful votes


called for reset on programming by Cox Cable. Worked...amazing!

Sylvania 6432TE... | 198 views | 0 helpful votes


This problem is caused by your TV's V-chip setting.

To fix the problem:

Push the "Menu" button (on either the remote or the TV's fromt panel).
Use the "Channel Down" button to go to "V-CHIP SETUP"
Use the "Volume Up" button to select it.
In the V-chip setup screen, the rating that is selected by the user as viewable will allow that rating and only lower ratings to be viewed on that TV. (If TV-G) is selected, then any programs rated higher than TV-G will be blocked.

So, the easistway to get rid of any blocking is to set the rating to TV-MA (mature), and then any and all programs will be viewable on that set. Select "TV-MA" by hitting the "Volume Up" button after you have scrolled down to that rating with the "Channel Down" button.

Then hit "Menu" to exit out of the settings and saave your changes.

Sylvania 6432TE... | 514 views | 0 helpful votes


Did you finalize the DVD before you removed it from the VCR/DVD recorder? Until a disc is finalized, it won't work on another device. If you left some space, try to finalize it now. Does the disc play when in that Sylvania unit? It is possible that the unit is faulty and didn't focus the laser properly for writing to the DVD. (If you actually tried to burn to a CD and not a DVD-R, then no data was written to the disc. There are slight differences to the laser settings for CDs and DVDs.)

I hope this helps.

Cindy Wells

Sylvania... | 71 views | 0 helpful votes


Curtis International which made the Sylvania clock radio no longer has any support for its legacy electronics. ManualsLib has manuals for several Sylvania clock radio models here: https://www.manualslib.com/brand/sylvania/clock-radio.html . They have a link for the SCR1388B, https://www.manualslib.com/manual/944856/Sylvania.html . This document doesn't list the SCR1388B on the cover page. However, the two clock radios are probably similar enough that the manual will help you use your clock radio. If this manual doesn't provide enough details, please check some of the other manuals listed at the first link above.

I hope this helps. ManualsLib does provide an option to get the manual as a PDF. See the Download button near the top of the page. You will need to go through some CAPTCHA checks to download the file as a PDF.

Cindy Wells

Sylvania... | 333 views | 0 helpful votes


consider using 'auto search' on Motorola.
how ?
Turn on your TV and point the remote at TV during setup
1. Press and hold SETUP until the LED blinks twice
2. Press the TV POWER key.
3. Aim the remote at your TV and press and hold down the OK key.
4. Release the key when the TV turns off and setup is complete.

Sylvania... | 46 views | 0 helpful votes


Consider using 'auto search' on Motorola.
how ?
Turn on your TV and point the remote at TV during setup
1. Press and hold SETUP until the LED blinks twice
2. Press the TV POWER key.
3. Aim the remote at your TV and press and hold down the OK key.
4. Release the key when the TV turns off and setup is complete.

Sylvania... | 36 views | 0 helpful votes


Hi Elsie-
If you do not have the remote, you can change inputs by doing the following:
Changing inputs Inputs are selected by using a number of methods, depending on the model of your Sylvania TV. Switching inputs is usually accomplished by pressing the "Input Select" button on the remote. Each press will simply cycle through each available input on your TV. If no remote is available, the front panel has a button that matches the function on the remote. This button is located on the bottom-right side of the TV and doubles as the "Enter" button when accessing onscreen menus.

Hope this helps.

Sylvania... | 44 views | 0 helpful votes


To keep it short, that is the way most tvs are wired nowadays, so you are out of luck. You are limited even on Bluetooth connections to only two headphone sets. There are some ways around it though if your tv sound output is going to a decent receiver with its own speakers.

Sylvania... | 52 views | 1 helpful votes

Not finding what you are looking for?
Sylvania 6432TE 32" TV Logo

Popular Tags

25 questions posted

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76455 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sylvania Televison & Video

  • Sylvania Televison & Video

Most Popular Question

screen display menu keeps coning screen

  • Televison & Video
Loading...