20 Most Recent
Encore (ENLWI-G) (ENLWIG) 802.11g/b Wireless Adapter Questions & Answers
Greetings,
I am a technician. However,
Mike, your problem is so clear and crisp... Thank you for the excellent documentation...
Here is the solution...
The wireless PCI card should be detected by any PCI slots, doesnt matter whatever may be the chipset made off...
The Light in the adapter is "OFF", says there is no power supply to the adapter and that is the reason the Wireless card is not detected...
unplug the adapter from the board and clean the PCI slot on board with a soft brush(the Pins in the PCI slot may get in contact with each other if u use any hard materials to clean)...
On the PCI wireless card clean the metallic contact surface (the place where the pci slot comes in contact with) using an ERASER and clean the dusts left by the eraser properly...
Now connect it back and check if the light is getting LIT up on the card...
Then you can also check under device manager either in Network adapters or under other devices...
Sincerely, Manny...
Can't install encore pci wireless card ENLWI-G2
You need to update the driver from device manager and make sure that you browse for the driver from your installation CD because there are times that windows install its own driver for a device liek a wireless adapter.
hope that helps........
Hei
no problem just ask if u need some help
I have windows 10 and I am using Printshop deluxe 6.0. I worked fine since it was purchased Oct 2022, all of a sudden it won't print my projects and I can no longer save them as JPRG
If PrintShop Deluxe 6.0 is no longer printing your projects and you are unable to save them as JPRG after uninstalling and reinstalling the software, there may be a few other things you can try to fix the problem:
- Check the printer settings: Make sure the printer is properly set up and connected to your device. Check the printer settings to ensure that it is set to the correct printer and that the printer is not experiencing any errors or issues.
- Check for updates: Check for updates for the software and the printer driver. Installing any available updates may fix the issue.
- Check for compatibility issues: Make sure that PrintShop Deluxe 6.0 is compatible with your version of Windows 10. If the software is not compatible, it may cause issues with printing and saving projects.
- Repair or reinstall the software: Try repairing or reinstalling the software to see if it fixes the issue. Make sure to follow the instructions provided by the manufacturer or technical support team to properly uninstall and reinstall the software.
If these steps do not help, you may need to contact Encore or a technical support team for further assistance. It is also a good idea to check the documentation or manual that came with the software for any troubleshooting tips or recommendations.
I have the 112 twelve
Please clean the discs in + manner. Meaning, take a soft cloth and rub it un-down and sideways and not in circular manner we usually do. Also clean the read/write head of the CD drive. It is the shiny blue dot. try running the discs in your friends computer to make sure they are fine and not damaged.
Not finding what you are looking for?