D-Link 802.11g Wireless Router WBR-1310 (WBR1310) - Answered Questions & Fixed issues

Do you want to solve your problems by wasting money on unnecessary repairs by talking to a wirelessrouterexpert. The expert who can help you resolve this issue over the phone in a minute or two. Visit here:

D-Link 802.11g... | Answered on Aug 28, 2018 | 2,788 views

To access the configuration page for your router, try instead of the If that doesn't work try and go to the manufacturers website and see if you can find the correct address. These must be default numbers as they are similar to others I've seen. In the prompt for username and password, leave user name blank and type admin into the password box.You may need to reconfigure but I would see if there is free Live Chat support available from the manufacturers website for that. Try uninstalling and reinstalling the router program/soft ware that came with the router .Hope this helps

D-Link 802.11g... | Answered on Aug 16, 2018 | 912 views

Should be an easy task, you would just need to go through the manual, the section which covers firmware update, it's explained quite well. If you don't have the manual with you, then just download one from the internet: D-Link DCS 932L PDF Manual Download

D-Link 802.11g... | Answered on Jun 24, 2018 | 50 views

You should go to the dlink support web page to troubleshoot your problem. That message means that the link between your router and the internet is not working. Could be a physical or configuration issue.

D-Link 802.11g... | Answered on Feb 09, 2018 | 36 views

Try resetting your router

D-Link 802.11g... | Answered on Nov 26, 2017 | 171 views

This site can walk you through the process....


D-Link 802.11g... | Answered on Sep 01, 2017 | 451 views

Could be multiple reasons
Check the signal type
Play around with the Channel and see what connects better
Check the server time out
Ensure u dont have a limitation on number of IPs
Connect without wifi password, change type if works


D-Link 802.11g... | Answered on Jul 08, 2017 | 212 views

Ask the owner of the D-Link wireless router for the SSID (the name of the wireless network) and the password for that SSID.

D-Link 802.11g... | Answered on Feb 02, 2015 | 96 views

This is a "discontinued" D-Link router.
Older routers did not support the usage of a 'PIN'.
Also, that model has a significant software problem -- it fails to work correctly after 31-DECEMBER-2013. So, recycle it, and buy a new router.

D-Link 802.11g... | Answered on Feb 02, 2015 | 83 views

You need to log into the wireless router either by a computer that successfully connects wirelessly or by physically connecting with an ethernet cable. Once connected, log into the router by open a web browser (Internet Explorer, Mozilla Firefox, Google Chrome, Apple Safari), and typing the router's address (usually or into the Address (or URL) line. The default usernameand password is usually "admin" & "admin" or "admin" & "password". Once successfully logged in, look for a tab or link that says "Wireless" or "Security". You'll be able to change whether security is enabled or disabled, and the password associated with it. Your security options are WEP or WPA (or WPA-PSK). WPA-PSK is the most secure, but WEP is also an acceptable choice. Select the security option of your choice and either enter text into the passphrase generator or choose your own password and type it into one of the security key text fields. If you use a password that is not a plain english combination of letters and numbers, be sure to write it down so that you can enter it as needed on other wireless devices that need to access your router (ie-pda phones, game consoles, laptops, desktops, etc). Be sure to save changes so that the security settings and password is saved.
Let me know how you make out.

D-Link 802.11g... | Answered on Jan 03, 2015 | 212 views

Looking for the Linksys WRT120N default password? You probably have little reason to access your router on a regular basis so don't feel too bad if you've forgotten the WRT120N default password.

However, when you're troubleshooting a network problem and need to get in to the device, the WRT120N default password suddenly becomes very important.

For most versions of the Linksys WRT120N, the default password is admin. As with most passwords, the WRT120N default password is case sensitive.

In addition to the WRT120N default password, you can also see the WRT120N default username and WRT120N default IP address in the table below.

Note: The Linksys WRT120N default password may be different for certain hardware orfirmware versions.

If I have that information, I'll include the exact WRT120N version number along with the correct default password. You can usually find your Linksys WRT120N version number on the bottom of the router.

Be sure to change the default router password on your WRT120N to something more secure as soon as you're in. Then use a free password manager so you'll never forget your new WRT120N password.
Help! The WRT120N Default Password Doesn't Work!

At some point during the life of your particular Cisco Linksys WRT120N, the default password, username, and/or IP address might have been changed.

In most cases, if the Linksys WRT120N default IP address has been changed, the new IP address for the WRT120N will be the same as the default gateway IP address configured for your network connection.

See How To Find the Default Gateway IP Address for help.

In situations where the WRT120N default password or WRT120N default username has changed, you'll need to reset the Linksys WRT120N to factory defaults. You can usually do that via a special button or sequence of actions.

The WRT120N manual will have specific directions for performing a factory default reset. You can download the manual for the WRT120N from Linksys Support.

Please let me know if any of the WRT120N default login data below needs updated. For other questions about the WRT120N default information on this page, see my Default Password FAQ.
WRT120N Default Password & Other Default Login DataVersionDefault UsernameDefault PasswordDefault IPPrivilegesAll[none]admin192.168.1.1Administrator

D-Link 802.11g... | Answered on Nov 25, 2014 | 2,515 views

The WBR-1310 is just a router - you will also need a modem - the modem is the component that connects to your telephone line or to the cable providers cable - to get broadband into your home


you would connect the modem to this router in order to share your broadband service amoungst devices or to get wireless

D-Link 802.11g... | Answered on Jul 15, 2014 | 100 views

once you reset your modem than the default username and password is usually "admin"

D-Link 802.11g... | Answered on Jan 03, 2014 | 28 views

Follow this link to download stuff for you router.

D-Link support page

D-Link 802.11g... | Answered on Dec 02, 2013 | 37 views

You will have to reset it to a new one by using a hardware reset option at the back of router. Put in IP address of router in to your browser. Then it shall ask you for ID and password. Enter `Admin` or `admin` as ID and `Password` or `password` as password. You will see a web based setup opened in front of you. Go to the Wireless Lan settings and then you will SSID so change the SSID and this would be your network`s name. Then go to subsection security and select WPA2-PSK or simple WPA-PSK then enter your desired network key. Once done with all these things the click apply and reboot if prompted.
Good Luck

D-Link 802.11g... | Answered on Nov 20, 2013 | 73 views

By remote i suppose you mean your Wireless keyboard. if that is the case then simply log into your wireless router. All you need to do it to change your WiFi broadcasting channel. Go to WiFi or Wireless Lan setting and make sure that broadcasting is b/g/n mixed mode, then check what broadcasting channel is selected starting from 1 to 11/13, in case of extreme start or end make in middle like 6 or 7 and in case of any middle number like 6 to 8 make it either 10 or 3. By changing the broadcasting channel shall hopefully stop any interference with other frequencies.
Good Luck

D-Link 802.11g... | Answered on Nov 20, 2013 | 63 views

The CD is useless. Just use the IP to get in. The username is "admin" and there is no password.
Or you can go to the D-Link site for support

D-Link 802.11g... | Answered on Oct 24, 2013 | 1,071 views

Press the Reset button on the router (use a tip of a pen or extended paper clip).
Default URL:
Default user name is: admin
No default passowrd. Leave blank
See details

D-Link 802.11g... | Answered on Oct 23, 2013 | 26 views

You don't have to.
Reset your router and follow the instructions from manual.
Here is the manual for your router: D-link manual

D-Link 802.11g... | Answered on Oct 22, 2013 | 85 views

Not finding what you are looking for?
D-Link 802.11g Wireless Router WBR-1310 (WBR1310) Logo

780 questions posted

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts


Level 3 Expert

4369 Answers


Level 3 Expert

8091 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides