Top 20
Sony BRAVIA XBR KDL-V26XBR1 26 in. LCD HDTV Questions & Answers
The picture is black
If you're using components or audio video cable make sure there properly attached to the device and the TV......if you're using HDMI cords in most cases you probably have the wrong resolution set on the TV or the devise.
How to dis able the logo on the top of the screen?
Dear Tes
On the remote of your set, press the button that looks like a TV screen and has a plus ( + ) sign inside it. This is the display button. Press it repeatedly until the information disappears from the screen.
Hope this helps.
No picture, only colored vertical lines
Settings. It sounds like the convergence. It needs to be adjusted. Have had this problem before. A lot of people actually throw there TVA away because they have this problem and they think its broken, when its usually just a simple fix of adjusting the convergence. You have to make sure the little box, on the convergence settings is in the middle. Hope it fixes ur problem. :)
Screen Panel Broken
you no longer have a TV but a parts set. I will more than likely cost more to replace the screen vs. buying a new set. I would throw that puppy on Ebay or Craigslist and list it as a parts unit !!!
Sony bravia is stuck on
Same thing happened to me when I was channel surfing and landed on channel 18.7 in los angeles.
What worked for me was turn the power off and then back on. While it is powering on press the channel button either up or down quickly. It should jump channels. It only jumped one channel for me and was still frozen. Repeat the process and I was able to jump more channels out of the trouble zone and back to normal.
Once my tv was working again. I tried to autoprogram my channels again but it still picked up 18.7.
Also tried to "hide" the channel in channel management but it would go to 18.7 and froze up my tv again :(
Hope this helps anyone that has the same problem.
I just purchased a used
Greetings - Your Sony has the standard tuners for a current HDTV, NTSC (analog), QAM (cable), and ATSC (digital/HD) broadcast..
There's something going on with the Sony TV. It's a pretty high end TV so it might have some additional features that require you to do something different (I doubt it) but make sure you've been through the manual.
If you didn't get one with the TV you can download a PDF version
HERE.
Good Luck and Thanks for using Fix Ya.
Mikeywaf
.
My sony hdtv lost its
It is possible that the audio processor is locked up do to a small power surge and if you unplug the TV from the wall for 40 MIN., the audio should go back to normal.
Our Sony Bravia TV is stuck on one channel and
Same thing happened to me when I was channel surfing and landed on channel 18.7 in los angeles.
What worked for me was turn the power off and then back on. While it is
powering on press the channel button either up or down quickly. It
should jump channels. It only jumped one channel for me and was still
frozen. Repeat the process and I was able to jump more channels out of
the trouble zone and back to normal.
Once my tv was working again. I tried to autoprogram my channels again but it still picked up 18.7.
Also tried to "hide" the channel in channel management but it would go to 18.7 and froze up my tv again :(
Hope this helps anyone that has the same problem.
I have a Sony Bravia 52 inch HDTV that has a line
Check with a different CD or a different channel. Sometimes some,
secret codes are displayed to find the pirated CD. Any how check in different program channels. This is not TV problem.
If you have DVD try a similar action movies in CD and play to satisfy!
I have a 3 year old Sony Bravia 26" that has
No this isn't a problem that is well known on your tv.
If the lines are there , in the same configuration, constantly then the LCD panel is faulty and cannot be repaired - just junk it, replacing the panel would cost you more than a new tv.
If the lines are always in the same general position but change in position and look then the buffer memory from the image processor has failed - you must replace the entire mainboard - this is going to be expensive - around $300 - so it may not worth it. Your call.
Wide screen mode won't go back to "normal".
Was exactly what you said. The cable box settings were in wide mode. Couldn't figure it out at all. Funny thing was too.. on my cable box remote, the button under the #9 button is the # button.. it doesn't say zoom at all.. but it totally controls the zoom.
So thanks for that.. AND thanks for saying "under the #9 on the cable remote" instead of just saying .. the zoom button.
Thanks again!!!
My Sony Bravia 46' XBR46 LCD has horizontal lines
I hope this helps it seems Sony has extended warranty coverage for your TV for this issue.
http://esupport.sony.com/US/perl/news-item.pl?news_id=378&template_id=1
IF YOU FOUND MY SOLUTION HELPFUL PLEASE VOTE 4 THUMBS UP.
(any less hurts our averages)
Thank and Good Luck!
I have a sony bravia 46 inch flat screen that gets
had what sounds like the same problem. we had the protection plan and called for assistance. he advised us to unplug the tv for 1 minute. when we plugged back in, problem seemed solved. he could not explain why other than to check online with sony for more technical info about this remedy. stay tunned for whether it was a temporary fix......
Not finding what you are looking for?