Top 20
Jura Capresso Impressa E9 Espresso Machine & Coffee Maker Questions & Answers
Can't replace coffee grind drawer after emptying
That would normally mean that the brewing mechanism is not in the at rest or start of cycle position. Take the bin off the tray and see if you can slip the bottom tray back in now. Turn the machine on, let it run through the start up process and when completely stopped see if you can now remove tray and fit the spent grounds bin back where it should be.
Leaking steam valve
Jura are a top brand and offer service and repair on their machines. Ask your local Jura dealer for a repair estimate.
Jura capresso e9 water not coming through spout
Use a pin or a needle on the spout to clean the nozzle head. Most of the time this is due to useing to fine a grind in the machine. You may have to clean the head this way more then one time to get it to start working again properly.If you have any further questions message me back.
Thank you
Rick
We love our model E9
t is most likely the coffe you are using,I would suggest you try different roast from different brands until you find what you like..for axemple Lavazza coffe from Italy has all kind of different roast.
good luck
My built in Gaggenau coffee
Unplug the power cord, 10 seconds before plugging in again and turn on the device again. If the first did not work.. do it again..... this seems to be the very first option to clear the error.
Here are some remedies that might actually clear the errors cause these are the reasons:
1. Look inside your device by removing the chrome cover plate of the shelf (using a philip screw driver), where cups are laying.. Examine carefully if the Prestor part is unable to carry out its function properly. Remove anything that blocks it. residue and particles of grind coffee. You can use a vacuum to **** it.
2. Error 8 was a wedge set part of the prestor had pushed outward the flexible. Try removing the drip tray and unplug your device wait for 10 seconds before plugging it again and turn on the device. After that return back the drip tray.
After you tried these tricks go on the first option again.
Hope that helps.
Alp
Get "error 8" often and machine freezes up. after
We have here the istructions for your problem<br />
<a href="http://www.fixya.com/support/r5713182-jura_capresso_impressa_f9_malfunction_8">http://www.fixya.com/support/r5713182-jura_capresso_impressa_f9_malfunction_8</a><br />
<br />
Thank you for using FIXya
Jura E9 grinder spins but does not grind
I had a similar problem, and solved it by turning the grinder by hand against resistance. Apparently the grinder wasn't really turning during the cycle and needed to be cleared. If your beans are "hopping" this may be a different problem.
My machine states I need to fill it with beans
It seems that your grinder is clogged. try opening the lid for preground coffee. With a torchlight you will be able to see the outlet from the grinder. Clean out all the coffee that`s stuck there. It`s smart to have a small brush with an angle to do this, and then vacuum it all out.
Also, check your adjustment on the grinder, it shouldn`t be to fine, this could clogg the grinder again.
If this doesn`t help, you need to contact your local servicecenter.
Not finding what you are looking for?