20 Most Recent Sony DVP-NC85H Multi-disc DVD Player - Page 7 Questions & Answers


It's broken. Take it to a Sony service centre. DON'T try and fix it yourself, it is recipe for disappointment and expense. Let me know if you want to know why?

Sony Televison &... | Answered on Mar 10, 2020


The light blinking is a code. Count how many times it blinks in succession and that is the code number. Then, google 'Sony blink codes' and you will find the issue.

Sony Televison &... | Answered on Mar 09, 2020


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Sony Televison &... | Answered on Mar 08, 2020


No help yet for the Samsung with the TV 528 remoted. Only found instructions on YouTube that are not in English. I tried to contact the seller, but need to contact the manufacturer. The instructions on the back of the device sound strange, and essentially render the device useless.

Sony Televison &... | Answered on Mar 07, 2020


Please provide the model numbers for both the DVD player and the Sony remote. This will help us to find a solution for you. There are just too many combinations to try and guess the correct answer.

Sony Televison &... | Answered on Mar 03, 2020


Sony 4 blink code means either the backlight inverter board is bad or one of the backlights in the LCD panel has failed. It can also be the LD board or main logic board, check inverter board wires for arcing to ground.

Sony Televison &... | Answered on Mar 03, 2020


If your Sony remote control has a button for DVD player, use code search to find something that works. If a search through all codes stored in the remote control fails, you will have to try a different one.

Sony Televison &... | Answered on Feb 26, 2020


good luck fixing old CRT TV (relics) and finding matching

fly back transformer, 20kV. (dangerous you do know that right?)

Sony Televison &... | Answered on Feb 25, 2020


why not get the service manual on it, and not guess.
?
this is LED TV and any board inside scan fail even the LED bank.
lacking the real manual how can you even check voltages?
ask sony for the manual yet?

Sony Televison &... | Answered on Feb 25, 2020


this is relic why mess with any CRT TV ever again.
Cathode Ray Tubes are , RELICS now.

RTM?
https://www.manualslib.com/s/sony+kv-hw212m50.html

Sony Televison &... | Answered on Feb 25, 2020


you left off what is wrong, tell the story.??
are the batteries inside free and inserted the correct way?

Sony Televison &... | Answered on Feb 25, 2020


https://www.lifewire.com/fix-tv-turns-on-by-itself-4685838f

Sony Televison &... | Answered on Feb 20, 2020


https://www.sony.com.au/electronics/support/articles/00198068

Follow these steps and see if the problem is resolved.
  1. Set the TV audio output setting to PCM.
  2. Change the Sound Bar settings as follow, using the included remote control. Set Sound Mode to Music by pressing the sound mode setting button (Music). Set VERTICAL S. to Off by pressing the VERTICAL S. button repeatedly.

Sony Televison &... | Answered on Feb 20, 2020


Change your audio setup to stereo. if you are running two speakers

Sony Televison &... | Answered on Feb 20, 2020


After the replacement of the main board; a software update might be necessary to any TV. Contact any service technician, of do it yourself, if you know how to do it. Or Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Sony Televison &... | Answered on Feb 12, 2020

Not finding what you are looking for?
Sony DVP-NC85H Multi-disc DVD Player Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sony Televison & Video

  • Sony Televison & Video

Most Popular Question

just bought dvd player used without

  • Televison & Video
Loading...