20 Most Recent Sony DVP-NC85H Multi-disc DVD Player - Page 4 Questions & Answers


Hello
8 time blinking is a software problem but in this case please replace the main board after replacing main board set become ok.
thanks
M Nasir

Sony Televison &... | Answered on May 14, 2020


Hello
please replace optical pick up ten your Bd payer able to play BR disc
thanks
M Nasir

Sony Televison &... | Answered on May 14, 2020


Hello
6 time red light blinking means back light problem please replace the back light after replacing back light your set become ok
thank
M Nasir

Sony Televison &... | Answered on May 14, 2020


Hello
in this case ld board is defective please replace ld board .
thanks
M Nasir

Sony Televison &... | Answered on May 14, 2020


Hello
once vertical line appear then there is two type of repair available one is replace the panel and second is repair the panel if Cof bonding machine is available in your area
thanks
M Nasir

Sony Televison &... | Answered on May 14, 2020


Hello
in this case Panel is deflective please replace the panel
thanks
M Nasir

Sony Televison &... | Answered on May 14, 2020


Make sure the MUTE function has not been activated. Try turning up the volume level. Check that there are no headphones connected. Check if the issue also occurs to other device connected to the TV.
https://www.sony.com/electronics/support/articles/00023449

Sony Televison &... | Answered on May 14, 2020


Take it to a Sony Authorised Service Centre for an opinion but I dare say it has had liquid damage and conductive material has impregnated the driver board connected to the screen.

Sony Televison &... | Answered on May 13, 2020


Hello Julie
You don't actually state what you are after?

So we will just guess. Here are the codes for the television

One-For-All Universal Remote for SONY TV:
SONY TV 3 digit codes:
111
011
273
000
080

Here are the instructions to program the remote

Instructions for Programming Jumbo Remote Control
www.directutor.com > jumbo_remote_programming_insructions_codes
Jumbo Universal Remote control Instructions to program your devices like TV, Blue Ray Player, Roku, Cable TV Box and more. With large buttons its easy to ...

Sony Televison &... | Answered on May 12, 2020


As there could be so many different part numbers within even the same model TV you will need to take the old part out and read the part number directly from that.

Sony Televison &... | Answered on May 12, 2020


Sony Eight blinks - Problem with the audio (AUDIO), unit goes to standby and blinks the self-diagnosis code. Check IC406 audio amp, PS401, and 402. On some projection models of Sony TV sets, this code means that T8005 (flyback transformer), or the associative components in the high voltage circuits are defective on the D board.

Sony Televison &... | Answered on May 10, 2020


This sounds like a backlight issue....... If you shine a torch light into the screen do you see a faint picture? If yes then definitely a backlight issue but it could be the led backlights blown or the T-con board, further tests would be required to determine which.

Sony Televison &... | Answered on May 07, 2020


When a DVD disc is created, it is encoded with a "Region number." The disc will only play on DVD players with the same Region number - for instance, a Region 3 disc won't play on a Region 1 player.
Region 1: U.S. and U.S. Territories, Canada
Region 2: Japan, Western Europe, Middle East, South Africa
Region 3: South Korea, Hong Kong, Taiwan, Southeast and East Asia Region 4: New Zealand, Australia, Pacific Islands, Mexico, Central/
South America
Region 5: Russia and the former Soviet Union, Africa, Indian
subcontinent, North Korea Region 6: China
The only way to get around the region codes, is to rip a DVD to your computer and remove the region code. Then burn the DVD to a DVD R. There are programs around on the net, but I'm not sure it is legal in all countries.
Google for the programs.
A DVD player sometimes allows you to change the region code once. But it not even would allow you to switch back after you changed it once.

Sony Televison &... | Answered on May 07, 2020


Try disk on other machine to see if it works. If it does then the issue is with your machine. If it does not, then the problem is with your disk.

Sony Televison &... | Answered on May 07, 2020


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details of many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.
View the site by desktop or webview on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts.

Sony Televison &... | Answered on May 04, 2020


movies in black and white Mike, check or change your cables, try other in/out puts.

Sony Televison &... | Answered on Apr 28, 2020

Not finding what you are looking for?
Sony DVP-NC85H Multi-disc DVD Player Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76403 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sony Televison & Video

  • Sony Televison & Video

Most Popular Question

just bought dvd player used without

  • Televison & Video
Loading...