Top 10 Sunbeam 5891 Bread Maker Questions & Answers

Sunbeam 5891 Bread Maker Logo

Question

  • 6,238 People Helped

HHH Error Code

Have purchased Sunbeam Bread Maker and made one loaf. When I attempted to make a second loaf, the machine began beeping repeatedly and showing a HHH error code.

Posted by on

Answer

  • Most Helpful of 1 Answers

Generally, an HHH error code means the machine is sitll too hot from making the previous loaf. Keep the door open for a bit and allow it to cool down.

Posted on Jan 25, 2009

Question

  • 5,990 People Helped

horribly loud grinding noises in bread machine

I have a sunbeam bread machine model 5891. After 10 months of 2 times a week use, the machine makes horribly loud sounds when turning. I think I read that you shouldn't oil this machine. Is this correct and how should I quiet this appliance?

Posted by on

Answer

  • Most Helpful of 4 Answers

I made many loaves of bread over the past 2 years and then I heard a grinding noise with the last loaf I made, earlier today. When I cleaned it, I noticed that the dowel that holds the paddle was lose. When I pressed it down, during cleaning, it popped right out. There was what looked like a shredded white plastic washer. It would be nice if I could order this washer but I suspect this might be the end of that bread machine, since nobody here seems to be offering a solution. I don't even see where I could order the whole breadpan. Sunbeam only offers the whole bread machine. And Amazon offers the paddle.

Posted on Jan 09, 2010

Question

  • 4,042 People Helped

how to remove bottom panel of sunbeam breadmaker

It seems that there is something wrong with the motor or maybe the drive belt. I removed the 5 screws at the bottom but the panel wont come off. Any advice?

Posted by on

Answer

  • Most Helpful of 1 Answers

Remove the screws in the oven and the screw holding the heat element.

Posted on Feb 02, 2013

Question

  • 3,771 People Helped

My sunbeam breadmaker will not

My sunbeam breadmaker will not mix the dough. The detachable mixing arm on the bottom won't spin. I had to quickly mix the dough and put it back in to bake

Posted by on

Answer

  • Most Helpful of 1 Answers

If you are feeling handy unplug your machine, turn it on one side and remove the bottom panel with a phillips head screwdriver. You may find your drive belt has come off or broken. If that is the problem you may be able to find a replacement for it from Sunbeam, or I may have one that will fit it.

Posted on Aug 02, 2011

Question

  • 3,013 People Helped

Sunbeam 5891 Bread Machine The drive belt has

Sunbeam 5891 Bread Machine The drive belt has fractured. How does one remove the bottom cover? Where may one obtain a new belt?

Posted by on

Answer

  • Most Helpful of 3 Answers

The upper and lower shell snap together. I removed screws from the bottom and could not separate the shell. I them unscrewed the metal shroud from the inside and removed it. It is a tight fit. You will see the snaps inside. I pushed on a couple of the snaps and the shell came apart. I am sure you will be able to address your issue from there. I am trying to find out why the heating element won't work on my machine.

Posted on Dec 28, 2010

Question

  • 2,604 People Helped

Bread falls in last 30 min of baking

I have made 5 loaves of bread so far in this machine...all 5 loaves haven fallen in the last half hour or so of baking. This has been 2-3 different recipes...and they keep falling...Help!

Posted by on

Answer

  • Most Helpful of 3 Answers

Use a little less water. try that and see if it helps. Just start with a TBSP shy of current recipe.

Posted on Mar 01, 2010

Question

  • 2,099 People Helped

Bm100 Remington Manual Breadmaker ?

I Need Bm100 Remington Breadmaker manual?

Posted by on

Answer

  • Most Helpful of 1 Answers

Ask the breadmaker manual search engine:

manualfox.com/searchengine/breadmaker.htm

If they find it, they will provide you a direct download link.

Posted on Sep 09, 2010

Question

  • 2,061 People Helped

Reset sunbeam breadmaker

How do I reset the program if I make a mistake.

Posted by on

Answer

  • Most Helpful of 1 Answers

Hi,
Press the start/stop button for 15 seconds.

Hank

Posted on Aug 20, 2009

Question

  • 1,971 People Helped

I need a manual for the Sunbeam 5837-33 Breadmaker.

I really want to get the manual and hopefully it has recipes and instructions so I can use it.

Posted by on

Answer

  • Most Helpful of 2 Answers

Find the exact Sunbeam 5833 5837 manual here for direct download:
http://manualfox.com/link/sunbeam.htm

Posted on Aug 02, 2009

Question

  • 1,901 People Helped

Collapsed bread

The top of every loaf of bread collapses. It never makes a raised top.

Posted by on

Answer

  • Most Helpful of 4 Answers

Likely, your loaf is too wet.
This can happen with as little as 1 Tablespoon too much liquid. It's hard to describe "the look," but what I learned to do was to watch the bread during the initial mixing cycle (after the paddle begins to turn full circles). The dough should not stick to the side of the pan while mixing, and it should look elastic, but not shiny. If it looks shiny, there's too much liquid in relationship to flour. I add a tablespoon of flour at a time during the mixing cycle, until I get a good consistency.
There's nothing wrong with the taste of the sunken loaves. We usually just shrug and eat them anyway.

Posted on Oct 22, 2008

295 questions posted

Ask a Question

Usually answered in minutes!

Top Sunbeam Kitchen Appliances - Others Experts

Cindy Wells

Level 3 Expert

6555 Answers

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

685 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15080 Answers

Are you a Sunbeam Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

5891 Bread Maker Sunbeam

  • 5891 Bread Maker Sunbeam

Most Popular Question

sunbeam 5891 bread machine drive belt

  • Kitchen Appliances - Others
Loading...