20 Most Recent Garmin Nuvi 360 Bilingual GPS Navigator and Personal Travel Assistant GPS Receiver - Page 9 Questions & Answers

https://support.garmin.com/support/manuals/searchManuals.faces?refresh=true There will be a small label by the power connector with that info. After you have the model you can get the manual at the above link.

Unplug... Install drivers and software 1st!... Then plug in usb

Garmin nuvi 1490T Factory Reset hay i found this for you it may help I had the exact same problem. No response from a Master Reset. I finally tried to put the unit into a stand by mode. Press the top left corner of the display and power the unit on. Keep pressing the top left corner and the "GARMIN" will displayed. Release to power button, then quickly plug the unit into a computer. You should see a green dot in the lower left hand corner of the screen. Release the top left corner and you should see the green bar start to load. When the green bar goes across the screen the unit should show it plugged into the computer and your computer should recognize it. I know it was tempting faith, but I used the WebUpdater (this originally caused my problem), again and this time it worked and everything seems to be fine.You can search the Garmin forums on how to put the unit into the Standby mode. It took me a couple of tries to get the sequence right, but I was pleasantly surprised.

You need to mention what model you have. There are many different screen sizes which affect price. Here is more information about screen repair. SHARCNET USA Out of Warranty GPS Digital Camera Repair

Do the update again as you did the first time only make sure the unit doesn't become disconnected.

The Gamins are not sealed. You might try putting in a zip lock bag full of uncooked rice and leaving it for a few days. The rice will absorb the moisture that is in your GPS.

Depending on the model, you may or may not have free map updates. You will need to connect your GPS to your computer and log into Garmin. You will need to down load Garmin Express from the Garmin web site. Once the software is installed, it will either find your gps, or tell you connect your gps to your computer. After that, just follow the screen prompts.

Depends on the model and your subscription for maps. Some have lifetime maps subscription while for others you need to purchase

Use Google Translate to input the address in the format it requires: https://www.google.com/search?q=translate&ie=utf-8&oe=utf-8

Is it charging/turning on with the car charger that came in the box? If it is, then it is possible your cable is not inserted properly or it is defective. You can try another USB to Mini USB cable (should not be too costly) and see if it works. To download the maps, first go the the Garmin website: https://connect.garmin.com/en-US/start/ and download the Garmin Express program, install it, plug in your device. It will be found by the program and the updates should be begin. Hope this was helpful, don't forget to click the HELPFUL button below.

Try running an update with Garmin Express, let it sit for 30 Min after it says it is done, then check again otherwise you may have jsut installed a smaller region ,... again Garmin express could help.

To reset device, power off. Then power on but keep your thumb on the bottom right or top right of the screen ( Depending on model ) as it is booting up, then if done correctly there should be a message saying along the lines of " Factory reset item, all data will be erased " In theory this should reset the device to factory and remove pin.

Try checking the port where de power cable goes in, it might be broken, or making a bad contact. Try moving the cable and see if that's the problem.

Corrine, model # Nuvi57LM, usually on lower back of GPS, if not it has to be in manual or on box. links below may help. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." myGarmin Product Registration nuvi 57LM Garmin Garmin Nuvi 57LM GPS Review