Top 20 Jensen VM9511TS AM/FM/CD/DVD/SD Player/7" LCD Car Video Player Questions & Answers

change the dvd format and burn on new dvd

BHPhotoVideo.com
This place claims to have parts for this!

Double check the fuse and make sure that you are sending power to the radio. Check the fuse on the radio also important to check the ground and accessory wire too.

-david

U must buy an adaptor cable, to plug the audio and video to the RCA jack of ur Jensen.

U could ask the nearest dealer about the adaptor accessories, I have one myself!

Hope that plugs everything up!

Yeah sure. If you can just get me the make and model of the tv I can surely help you or atleast give my best shot.

Sai.

what color is the wire from the radio it might be pink or purple with white strip. but the wire needs to see ground or parking brake wire

Hello eddyboy415,

I am really sorry to tell you that its your main board(mother board.)
You can look it up on ebay i pretty sure they have it.
i would suggest you to get new model if the mainboards(mother board) costs more than $100

Please let me know if you have any further questions or concerns.

Thanks.

THE PARKING BRAKE FEED IS NOT FITTED OR RUN TO EARTH,

Not available, sorry!

The issue is that the 4th Generation iPod takes far more energy to run than your 4gb iPod. Updating the firmware has nothing to do with it. It's the amount of energy/voltage that this new 8Gig unit takes to run.
Think of it as a 4 cylinder verses an 8 cylinder engine. The 8 takes far more gas to run.
Blessings,
A/V Media Guy

I assume you want to play a video that is stored on a sd card.To play this video you need to find out what is the compatibility of the player.A computer can play many formats, for eg it could be a mpeg4 format but this would not be able to play in any other player.There are few softwares that are readily available free of charge from the internet that would allow you to do a conversation of the format of the video.This way it will work on your player.Hope this helps.

to see if your remote is working obvouisly put in new fresh batteries turn on the camrea on your phone or get a digital camrea and point the infa-red sensor at the camrea and press some buttons while looking at the screen of your phone/digi cam should see a white flashing lights as you press the button if nothing then the control is dead

yes you can watch video
I alredy did it in my jensen
all you have to do is:
xvid avi
video codec: mpeg4
video bit rate: 887kbits/s
video size: 576x320
aspect ratio: 16:9


set this setting in total vide converter
do the convertion and that's.

Try grabbing a new needle assembly from http://www.lpgear.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=LG&Product_Code=CLASSICCSL9
Also, you can tape a penny to the back of the arm, will add enough weight to keep the arm from traveling all the way across the record.

try changing the drive letter, follow this link to change it http://www.methodshop.com/gadgets/tutorials/driveletteri/index.shtml

Go to www.google.com then type JENSEN CODE choose the first one on the top.

their should be a little reset button on it some where pop a pin in it for a minute it sould work

do you have the installation manual,if you have it you are mising to conect a pink wire which is the parking brake wire,follow the sequence step to get the picture.email me i can help you remind me about your problem, [email protected]

hook your green/white camera override wire to your parking wire that should solve your problem

did you put a toggle switch in between the wiring ?