Top 20
Sony CDX-FW700 CD Player - Page 9 Questions & Answers
Need code for sony cdx-l480x eq3 stereo
There is no code for resetting a radio. If there is not reset switch, you can reset a radio by disconnecting power to it for a few seconds. This can be done by either disconnecting the wire harness behind the radio, or if you don't know how to get the radio out of the dash, you can disconnect one of the terminals of the battery for a few seconds.
SHOWS CD ERROR
The lazer is probally shot, End not reading the info off the disc any more,
No tp for sony cdx-c5000r
hi shawn, try deselecting the TA feature of your unit and then try tuning for stations. before doing this i assume your antenna is in good working condition. if this does not solve your problem, then "reset" the unit and retry tuning for radio stations. reset switch will be found on main unit behind the face. cheers.
Sony CDX-S2250s
hello, if all the wiring and battery voltage levels check out fine then, try resetting the unit by using the microswitch behind the face unit. if this does not work then make sure that ALL the switches on the face have a definite "click" feel when pressing them down. those for "volume" and "track up/down" are known to collapse, and thus cause the microcontroller to become "confused." to solve this problem you will have to replace these microswitches. lastly an internal power supply fault or a circuit fault can also cause these problems. cheers!
My car radio is not switching on.the name of my
For the most part, all car stereos, including the Sony XPLOD car stereo
will have the same basic wiring with the exception of some additions for
connecting to after market amplifiers. They all have a wire for the
memory which is continuous power and one for main switchable power.
There will be one main ground and a speaker ground. The rest of the
wires are for the speakers. These are usually paired as the same color
except the wire with the black stripe is the speaker ground. The easiest
way to hook up a new radio is to get a pigtail harness for the Sony
XPLOD from any store that sells radios. This is a direct hook up
simplifying installation. The pigtail has the proper connection to
simply plug in to the original connector and the other end to the new
radio.
I forgot my security code for a Sony xav-62bt
Try entering code "5415" with your remote to unlock this radio.Or you can reset your
unit by reset button. download XAV-62BT manual from here and refer to
the Page 14 for reset instructions and Page 10 for reset button location
on unit. http://www.docs.sony.com/release/XAV60_EN_FR_ES.pdf
I have a sony xplod cdx-gt520. I just put in new
double check that you have the cables plugged into the "AUX IN", and that the "AUX OUT" is going to the amp. or just not connected if you have no amp. If that is correct, then try a different AUX cable, you may have a broken ground in the one you have.
Not finding what you are looking for?